Reference: 152122
kit of 4 sheets 20 X 15cm, joint board BA55 250°C multi-thickness fiber for car, mécaboite, scooter, mob, ... to be cut
Kit of four reinforced fiber gasket sheets 250°C, different thicknesses included.
Banner
Please refer to the photo by enlarging it before purchase!
Here is the very complete and very high quality seal pack from ATHENA to restore all your old and rare motorcycles 50cc GILERA BULLIT, EAGLET, RM .... Delivered as presented on picture!
contains:
X1 clutch housing seal
X3 base seals of different thicknesses
X1 water pump seal
X1 aluminum cylinder head gasket
X2 metal washers
X4 cardboard washers
X7 O-rings
According to ATHENA, is mounted on:
Gilera BULLIT 50cc from 1990 to 1993
Gilera EAGLET 50cc from 1995 to 1998
Gilera RM 20-50 LC
Gilera TWIN 50cc
Gilera H @ K
Gilera RT 50cc
Gilera GSM engine MORINI
Gilera R 50
Gasgas 50 / 70cc trial
ROXON DUEL 50cc
Reference: 152122
Kit of four reinforced fiber gasket sheets 250°C, different thicknesses included.
Reference: 171800
Ideal for safe and leak-free mounting of your exhaust.
Reference: 279134_cgn
A good quality paste that resists up to 180 ° C with a maximum drying time after 24 hours.
Reference: 256.0010
It is a seal with the best components that currently exist for a perfect seal. WARNING LAST ITEM AVAILABLE!
Reference: 156189
Two standard joint boards in 0.25 and 0.50mm + BA55 0.3mm cardboard joint + steel reinforced joint in 1mm
Reference: P400010850002
Pack seal of high quality for a perfect seal of your high engine.
Reference: P400170600031
Indispensable for the complete refurbishment of the top engine seal of your 2 wheels!
Reference: 5910
A top-of-the-range joint compound for maximum resistance and tightness. This paste resists from -55 ° to 250 ° C without problem.
Reference: 152110
Kit of four 150°C paper seal sheets, different thicknesses included.
Reference: P300000999002
Paste with elastic joint and resistant to high temperatures. (300 ° C). In a set of 12 tubes!
Reference: 2374
A low viscosity paste which will allow you a perfect sealing of your engine. This paw is often used by professionals.
Reference: 209.0380
Highly recommended after each disassembly to avoid loss of compression or engine leakage!
Reference: VJ.22.1
Indispensable for refurbishing the engine sealing of your Ø47mm aluminum ITALKIT kit.
Reference: 440923
ARTEIN self-cut seal sheets 0.15 0.25 and 0.50 mm.
Reference: P400130850170
Pack high quality seal for perfect sealing of your high engine.