Reference: F172450
EBR RACING COMPETITION black hydraulic adjustable aluminum fork for PUCH MAXI, PEUGEOT 103 and MBK 51
Adjustable hydraulic model including pre-compression for PUCH, 103, 51 ...
Banner
A chrome EBR RACING fork, standard adjustable in height to improve the handling and aesthetics of your PEUGEOT 103 or MBK 51! Between axis of the tees adjustable from 15 to 20.5cm. Brake block on one side only, delivered with speedometer support.
Here is the EBR RACING fork, it is delivered as in the photo, that is to say complete with the upper and lower triple clamps as well as the headlight brackets and the handlebar fixing (handlebar bridge).
This chrome fork can give a nice style to your PEUGEOT 103 or even MBK 51, do not hesitate to look at the technical characteristics if you are not sure of the assembly!
Above all, it has a low price! Its diameter of 30mm for the top and 35mm for the bottom except at the joints where the diameter is 43mm. It is made in Italy, it is also improved compared to the original fork for better handling and better absorption of irregularities, bumps...
It has a single brake block. It does not have a bracket to fit a disc brake caliper.
-Material: Chrome steel
-Stroke: 85mm
-Delivered with: headlight brackets, triple clamps, handlebar bridge, speedometer support...
-Diameter of the tubes: 30mm for the top and 35mm for the bottom
-Tees tube diameter: 25mm
-Height adjustable: yes
-Adjustment of the between-axis of the tees: Yes from 15 to 20.5cm
-Brake block: Yes, reversible on one side only, thickness 8mm, height 15mm
-For wheel axle: Ø12.5mm maximum
- Between axis of the tubes: 11.7cm maximum
-Total length of the tubes: 70cm at the lowest (cutting of the springs possible)
-System: standard springs
-Fixing the mudguard: Yes, 2 screws Ø6mm on each side, between axis of 18 to 50mm adjustable
-Recommended maintenance: Lubrication every 5000km, belgom chrome and fine steel wool in case of rust.
Reference: F172450
Adjustable hydraulic model including pre-compression for PUCH, 103, 51 ...
Reference: 159656
A cheap PEUGEOT type black fork.
Reference: 182594
Set of two fork axles for PIAGGIO CIAO.
Reference: 156275
A chrome fork and at a low price for your PEUGEOT 103 SPX, RCX, CLIP, MVX ...
Reference: 479170
Some remaining units only! 103 MVL chrome fork cover
Reference: 158046
Pair of dust covers for MBK fork or MOTOBECANE 88, 881 ...
Reference: 25320100
Ideal for improving the chassis of your CIAO!
Reference: R184220110
Ideal in the event of breakage, wear, vibration... in the direction of your moped.
Reference: 480420
A complete original type kit for simple and inexpensive repair.
Reference: 519129
Spring set for your moped fork!
Reference: F011290005N
An ideal fork to improve the aesthetics and handling of your CIAO, if you don't like the spring style, no problem, they rise to give a more elegant and sober style.
Reference: 3356
Ideal for refurbishing your original fork.
Reference: 157321
Pair of P2R fork boots on MBK 51 moped.
Reference: F011290085N
A black, hydraulic EBR RACING fork in height-adjustable aluminum to improve the handling and aesthetics of your PEUGEOT 103 or MBK 51! Between axis of the tees adjustable from 15 to 20.5cm. One-sided brake block, supplied with handlebar support.