Reference: 203.0066
Air filter, horn gate type K & N POLINI angled 90 ° (carburizing Ø34 Ø and 38mm to choose)
Ideal for positioning your filter at 90 °, a high-end filter for optimal protection of your engine against external impurities.
Banner
TEKNIX air filter foam board to cut, size 25X35cm so uncompressed size. This foam can serve you for your original air boxes or personal installation on your filters, air box ...
It is of course not as efficient as the POLINI air filter foam but will do the trick to replace the original one.
Reference: 203.0066
Ideal for positioning your filter at 90 °, a high-end filter for optimal protection of your engine against external impurities.
Reference: 114010W
MARCHALD FILTERS foam air filter for motorcycle SHERCO 50
Reference: 492195
TEKNIX foam air filter for motorcycle BETA RR 50 from 2005 (SM, EN DURO , ...)
Reference: 203.0170
POLINI air over-filter bag, allows the filtration of 90% of the impurities which usually leave directly in the air filter.
Reference: 99200.32
A stylish air box that will give a look to run your machine. Moreover, it allows a much better engine breathing it out to Labris moisture.
Reference: 203.0166
A filter with a large reserve of air, special large PWK carburetor, PHBH, PHBL, POLINI CP with tulip ... and other models. Ideal for a motor prepared competition!
Reference: 203.0157
POLINI air filter foam to cut, size 21X29,7cm / thickness 19mm uncompressed.
Reference: 31301
A simple filtration layer foam ideal to prepare your original air box.
Reference: 466739
A design air filter worked with very good performance.
Reference: 343.0026
Ideal to fit your Ø60 or 62mm air filter on your POLINI CP carburettor.
Reference: 480879
A good quality filter with colors to choose from to customize your engine without taking up space.
Reference: 05 0268
A filter that improved the venturi effect so the performance of your engine while creating his racing.
Reference: 04 3072
Here is a small filter that allows you to have a lot of area while taking up little space.
Reference: 203.0048
A filter available in 3 diameters and 2 lengths for maximum application, it reflects the quality of its design and design!
Reference: 203.1506
Ideal for adapting your air filter in Ø62mm on your PWK 24 to 30mm carburetor.
Reference: 04 2418.50
MALOSSI E5 air filter with black cover. Available for PHVA, PHBN, PHBL, MIKUNI, PHVB, PHF, PHBH ...