Banner
The single cylinder alternative SIMONINI for am6, delivered naked!
One spare cylinder kit 70cc on minarelli am6 Ø47,6mm. It is 100% identical to the one delivered in full kit, so this is an aluminum cylinder nykasil Treaty, 5 intake and exhaust transfers has booster. Note it is delivered bare, so seamless, without piston or cylinder head!
Optional we offer a preparation course 1, this preparation is a modification of the channels and the exhaust port by increasing the charts and improvement of the duct, it increases the cylinder performance. Improved piston and bottom skirt is also included in the amendment. Allow a little extra time for this preparation!
This high engine fits the 50cc motorcycles following gearbox fitted the engine MINARELLI AM3, AM4, AM5, AM6 Euro 1, Euro 2 AM6:
-APRILIA RS AM6 engine from 1997 to 2006 (after 2006, attention to motor past DERBI euro 3)
-APRILIA RX engine AM6 (after 2006, attention to motor past DERBI euro 3)
-APRILIA MX engine AM6 (after 2006, attention to motor past DERBI euro 3)
-Beta CRE
RR -Beta
-Beta RR ALU
-Honda HM
-Honda CRE
-Honda BAJA
-HUSQUVARNA WXE
-HUSQUVARNA CH
-HM DERAPAGE
-HM CRE
-MALAGUTI DRAKON
XTM -MALAGUTI
-MALAGUTI XSM
-FANTIC CABALLERO
-PEUGEOT XP6
-PEUGEOT XPS
-PEUGEOT XP STREET
-PEUGEOT XP STREET EVO
-PEUGEOT XR6
-PEUGEOT XR7
-MOTORHISPANIA RYZ
-MOTORHISPANIA RX-R
-MOTORHISPANIA RX
-RIEJU RS1
RS2 -RIEJU
-RIEJU RS2 MATRIX
-RIEJU RS2 MATRIX PRO
SMX -RIEJU
-RIEJU MRX
-RIEJU SPIKE
-KEEWAY TX EN
-YAMAHA DT
-MBK X-LIMIT
-YAMAHA TZR
-MBK X-POWER
SM -SHERCO
-SHERCO ENDURO
-SHERCO HRD
-SHERCO ENDURO
And many other machines!
Reference: CI.44.851.GR2
Cylinder / piston without cylinder head replacement kit 85cc Ø50mm, 6 transfers, large 32mm exhaust .... To accompany a long-stroke crankshaft with 44,00mm rod 85mm and its cylinder head high compression pad.
Reference: 9919210
In the same type as the DR RACING, powerful, solid, inexpensive. Ideal to replace your cylinder on the am6 engine with the very famous black TOP PERFORMANCES.
Reference: CI.44.848.GR2
Cylinder / piston without cylinder head replacement kit 80cc Ø48mm, 6 transfers, large 32mm exhaust .... To accompany a long-stroke crankshaft with 44,00mm rod 85mm and its cylinder head high compression pad.
Reference: CI.44.851.G14
Cylinder / piston without spare cylinder head, 85cc Ø50mm kit, 6 transfers, large 32mm exhaust, 14mm piston pin ... . To be accompanied by a 44.00mm long stroke crankshaft with 85mm connecting rod and its high compression stud cylinder head.
Reference: 30.432
Ideal for refurbishment resume without a complete kit, delivered without cylinder head.
Reference: H02138248
A much more solid kit than the aluminum models and which remains very torquey. Perfect for riding long distances every day without being afraid of a heater or primer.
Reference: CI.44.849.GR2
Cylinder / piston without cylinder head replacement kit 80cc Ø48mm, 6 transfers, large 32mm exhaust .... To accompany a 44,00mm long stroke crankshaft with 90mm rod and only its head high compression pad.
Reference: 36434.M3
Ideal for refurbishment without spending too much money.
Reference: 3112227
Ideal for refurbishment without taking over a complete kit, delivered without cylinder head.
Reference: 32134
The single cylinder to repair your maxikits SIMONINI 90cc on minarelli am6.
The single cylinder alternative SIMONINI for am6, delivered naked!
