Banner
One of the best value for money on the market. It is very well balanced in full mass of course reinforced to support the largest configurations.
Here is one of the best value for money on the market! The DOPPLER ER1 crankshaft is a reinforced model, balanced and in full masses, it is really intended for the reinforcement of the low engine and the performance. The steels used are of the highest quality, they are treated and well hardened, the balancing is dynamic and really neat!
When we talk about finishing at DOPPLER, we don't skimp! The finish is really perfect for such a price. The connecting rod is placed on a reinforced crank pin and a well increased cage with anti-friction wedges. Aluminum plugs obviously cover the balancing holes. For more pre-compression, the masses are extremely full. The lubrication is obviously reviewed and corrected too. The connecting rod is a very top-of-the-range model, well designed, casting mode. In short, this crankshaft will withstand most of the very equipped engines it offers excellent performance and resistance to the height. For the highest revs and the most efficient engines, we still prefer to use ENDURANCE but still more expensive! The connecting rod size, the stroke, the diameter of the bristles remain as the origin. This model is specific to DERBI except engine with balancing shaft / DERBI GPR balancer.
Technicalities :
Masses: full
Bristles: in Ø origin 20mm
Connecting rod: reinforced original size 90mm
Cage: original size 12X15X15mm
Stroke: origin: 40.00mm
Delivered with its needle cage
Reference: 478942
Strong and very good quality bearing at an affordable price.
Reference: 459124
A cage available in 2 sets of adjustment! Diameter Ø12 X 16 X 15mm for many applications.
Reference: 081015
The highest range model in ATHENA for bike 50cc DERBI euro 1 or 2, named hyper racing.
Reference: 5312320
The best original racing crankshaft for Derbi.
Reference: CIG-19
A cheap high quality crankshaft which will support large and small 50cc 70cc. Ideal in case of breakage or wear your old crankshaft.
Reference: 367443
One of the best value / market price. Very well balanced full-body, of course enhanced to support larger configurations.
Reference: 6030004
Original type crankshaft for old DERBI air-cooled engines.
Reference: 367238
The best value for money on the market, an unbeatable quality / performance / price ratio!
Reference: 518458
Set cast iron kit 50 + reinforced crankshaft in full masses for DERBI EURO 2 (until 2006).
Reference: 451391
TEKNIX reinforced crankshaft for engine DERBI euro 1 and 2. A solid model at great price!
Reference: CIG-77R
The crankshaft of the must in BARIKIT. It is perfectly balanced, it is mounted on a reinforced rod which is also based on a plus pin.
Reference: IM07040
A very good crankshaft, reinforced model that withstand today an original type of configuration to small 70cc.
Reference: 486139
A connecting rod assembly reinforced in full masses, solid and excellent quality with a low price! Ideal to accompany a configuration origin or slightly prepared on mécaboite Derbi Euro 2 engine, except GPR.
Reference: 441282
The best value for money on the market, an unbeatable quality / performance / price ratio! In addition to this, you need to know more about it.
Reference: IM07063
Vilo with bearings and spy tailored to fit together, reinforced model that withstand today an original type of configuration to small 70cc.
Reference: 435
The most performance crankshaft from ARTEK which can go up to 18,000 revolutions!
Reference: 31083750
A good reinforced crankshaft that mounts to virtually any configuration for an unbeatable price.
Reference: CIG-128R
The crankshaft of the must in BARIKIT. It is perfectly balanced, it is mounted on a reinforced rod which is also based on a plus pin.
One of the best value for money on the market. It is very well balanced in full mass of course reinforced to support the largest configurations.
