Reference: VI01
Crankshaft, connecting rod assembly MVT CARRERA race 39mm (Ø20mm bristles) for mécaboite minarelli am6
A very well balanced reinforced crankshaft that will support the largest configuration on the market.
Banner
Ideal to accompany the most powerful market cylinders, here ITALKIT COMPETITION crankshaft with bearings, it is the highest manufacturer's range vilo with the other link COMPETITION model milled from a block. This crankshaft comes with a pair of bearings Celerons (when you see the price of Celerons bearings you soon realize that this is a crank case).
It is dynamically balanced, its bearing seats are large Ø20mm silks for strength. Made in italy Mazzuchelli, quality is obviously with go ... Cut from the best steels with greater accuracy. The rod is a super enhanced model that obviously rests on a pin in Ø18mm and reinforced cage treated money raised.
The lubrication are also improved. Who go in rounds without any problems and which have a strong engine! The cage has needle rod feet is increased by Ø12X17X15mm. We will recommend these crankshafts on large configurations that require normal race 39mm like MALOSSI MHR TEAM, ITALKIT cylinder head stud, ATHENA HYPER RACING and many other high motor.
Spare rod
Cage spare needle
Replacement bearings
technicalities:
Masses: full
dynamic balancing
Silks: Ø20mm plus
Rod: reinforced size origin 85mm
Cage: increased 12X17X15mm
Race: origin: 39,00mm
Cage has needle: livery
Celeron competition bearings silk Ø20mm
Fits the 50cc motorcycles gearbox equipped minarelli am3, am4, am5, am6 euro 1 am6 euro 2:
Aprilia RS 50cc am6 from 1997 to 2006 (new attention after 2006 engine derbi euro 3)
Aprilia RX am6 engine (new attention after 2006 engine derbi euro 3)
Am6 APRILIA MX engine (new attention after 2006 engine derbi euro 3)
Aprilia Tuono 1997 am6 50cc engine 2006 (new attention after 2006 engine derbi euro 3)
BETA RR
BETA RR ALU
BETA CRE
HM HONDA
HONDA CRE
HONDA BAJA
HUSQUVARNA WXE
HUSQUVARNA CH
HM DERAPAGE
HM CRE
MALAGUTI DRAKON
MALAGUTI XTM
MALAGUTI XSM
FANTIC CABALLERO
PEUGEOT XP6
Peugeot XPS
MOTORHISPANIA RYZ
Peugeot XPS
PEUGEOT XP STREET
PEUGEOT XP STREET EVO
Peugeot XR6
MOTORHISPANIA RX
PEUGEOT XR7
MOTORHISPANIA RX-R
RIAJU RS1
RS2 RIEJU
RIEJU RS2 MATRIX
RIEJU RS2 MATRIX PRO
SMX RIEJU
RIEJU MRX
RIEJU SPIKE
KEEWAY TX EN
YAMAHA DT
MBK X-LIMIT
YAMAHA TZR
MBK X-POWER
SHERCO SM
SHERCO ENDURO
SHERCO HRD
SHERCO ENDURO
CPI SM
And many other machines!
Reference: VI01
A very well balanced reinforced crankshaft that will support the largest configuration on the market.
Reference: IM07017
Original type crankshaft and superior quality. Reinforced, solid and resistant model.
Reference: CIG-29
A reinforced version in solid masses for minarelli am6 with normal size bearings!
Reference: 518745
The ultra-reinforced full-mass CHR crankshaft. Forged / ground connecting rod with heat treatment!
Reference: 19880
A reinforced crankshaft at a low price but very well balanced. Ideal for small 70cc or 50cc kit.
Reference: 486138
A solid linkage in full masses, very reinforced and of excellent quality with a low price! Ideal to accompany an original configuration or slightly prepared on mécaboite Minarelli AM6 engine.
Reference: 090935A
A crankshaft, solid, reinforced and of very good quality for a small price.
Reference: S410130320001
A good crankshaft reinforced and in full masses for your minarelli am6 with bearings of origin size.
Reference: 264006
The DOPPLER ER1 is the best value for money on the market, this model is reinforced and well balanced.
Reference: 451390
A very good crankshaft at low prices which will support 50cc kits like 80cc.
Reference: 6030003
High quality crankshaft at low price for am6 engine.
Reference: 150838
The most performance crankshaft from ARTEK which can go up to 20,000 revolutions!
Reference: CIG-130R
A reinforced crankshaft for a solid low engine, ideal to accompany a prepared configuration!
Reference: 9921720
A vilo of quality to guarantee a solid and powerful engine!
Reference: 367223
One of the best quality, price and performance ratios on the market.
Reference: IM07062
An original crankshaft with bearings and spy perfectly adapted to be assembled together, reinforced model which will easily support an original type configuration up to the small 70cc kit.