Reference: CB.44.91
Crankshaft bearings + Celerons ITALKIT COMPETITION race 39mm (silks of Ø20mm) for mécaboite minarelli am6
A crankshaft of high quality with a casting rod, delivered with its bearings celeron big litter !!!
Banner
Here is the highest-end crankshaft from BARIKIT (just below the BRK) for motorcycle 50cc MINARELLI am6. This model is cut in good steels, it has a rod reinforced polished finish that rests on an increased crankpin.
Unlike the model SPORT, this vilo has a real work on the lubrication but also on the balancing and real solid masses, it thus offers a gain of performances. It will accompany very well your kits 50cc or 70cc of small and big power. This vilo with its weight has excellent inertia.
Delivered with its needle cage. This version in bristles (bearings) Ø17mm is to be mounted with bearings size Ø17mm X Ø40mm X L14mm. A great value for money. It also has a very nice finish. The needle cage has been increased in Ø12 by 16mm by 16mm to reduce friction and increase strength. The cage delivered is a model with good quality studied lubrication.
Summary :
Race: 39mm as the origin
Reinforced: yes
Masses: full
Needle cage: Ø12X16X16mm plusée
Yes and dynamic balancing
Connecting rod: reinforced size origin 85mm
Crankpin: Ø18mm
Greases: reviewed and corrected
Mounts on motorcycles 50cc has gearbox equipped with minarelli am3, am4, am5, am6 euro 1, am6 euro 2 :
APRILIA RS 50cc engine am6 from 1997 to 2006 (attention news after 2006 in derbi euro 3 engine)
APRILIA RX engine am6 (attention news after 2006 in derbi euro 3 engine)
APRILIA MX engine am6 (attention news after 2006 in derbi engine euro 3)
APRILIA TUONO 50cc engine am6 from 1997 to 2006 (attention news after 2006 in derbi engine euro 3)
BETA RR
BETA RR ALU
BETA CRE
HONDA HM
HONDA CRE
HONDA BAJA
HUSQUVARNA WXE
HUSQUVARNA CH
HM DERAPAGE
HM CRE
MALAGUTI DRAKON
MALAGUTI XTM
MALAGUTI XSM
FANTIC CABALLERO
PEUGEOT XP6
PEUGEOT XPS
MOTORHISPANIA RYZ
PEUGEOT XPS
PEUGEOT XP STREET
PEUGEOT XP STREET EVO
PEUGEOT XR6
MOTORHISPANIA RX
PEUGEOT XR7
MOTORHISPANIA RX-R
RIAJU RS1
RIEJU RS2
RIEJU RS2 MATRIX
RIEJU RS2 MATRIX PRO
RIEJU SMX
RIEJU MRX
RIEJU SPIKE
KEEWAY TX EN
YAMAHA DT
MBK X-LIMIT
YAMAHA TZR
MBK X-POWER
SHERCO SM
SHERCO ENDURO
SHERCO HRD
SHERCO ENDURO
CPI SM
And many other machines!
Reference: CB.44.91
A crankshaft of high quality with a casting rod, delivered with its bearings celeron big litter !!!
Reference: 419
A very good quality mid-range crankshaft designed to go up to 14,000 rpm!
Reference: 6030003
High quality crankshaft at low price for am6 engine.
Reference: 210.0052
The new version of the crankshaft POLINI EVO for minarelli am6!
Reference: 53401.14
From the top of the range race origin 39.00mm for mécaboite engine Minarelli AM6!
Reference: CIG-133R
A reinforced crankshaft for a low solid engine, ideal to accompany a prepared configuration! Stroke slightly increased to 40.7mm!
Reference: 264006
The DOPPLER ER1 is the best value for money on the market, this model is reinforced and well balanced.
Reference: CB.44.8
A horse race between normal and long, wedge assembly without machining or on your small gain am6 and engine capacity (+ 1mm travel).
Reference: 80038
An excellent crankshaft, made in Italy, finishing and impeccable balancing!
Reference: 486138
A solid linkage in full masses, very reinforced and of excellent quality with a low price! Ideal to accompany an original configuration or slightly prepared on mécaboite Minarelli AM6 engine.
Reference: CB.44.91R
The ULTIMATE vilo for am6, gorsses worn 20mm, celerons bearings, forged rod machined mass, excellent balancing, .... The best of the best !!!
Reference: 075414
A very high quality crankshaft, in large bristles, full masses delivered with its bearings for am6 engine!
Reference: 19880
A reinforced crankshaft at a low price but very well balanced. Ideal for small 70cc or 50cc kit.
Reference: 518745
The ultra-reinforced full-mass CHR crankshaft. Forged / ground connecting rod with heat treatment!
Reference: CIG-22
A reinforced crankshaft sport for minarelli am6!
Reference: 090936B
An ultra reinforced and perfectly balanced crankshaft for AM6. Ideal for large setups.