Reference: 31134950
Crankshaft, connecting rod assembly AIRSAL Xtrem race 39mm (silks of Ø17mm) for mécaboite minarelli am6
A good reinforced crankshaft that mounts to virtually any configuration for an unbeatable price.
Banner
Here is the strongest crankshaft from ARTEK for your MINARELLI AM6. A reinforced model, balanced in full masses, it is really intended for the reinforcement of the low engine and the performance, it is certainly the most studied crankshaft on the market. What are the differences with the K1? The connecting rod, the materials used, the tolerance to high speeds .... More clearly the reinforcement and the balancing which are even more neat! The steels used are of the highest quality, they are treated and well hardened, the balancing is dynamic and really neat! The connecting rod is a very high-end lightened H-shaped model with grease at the head and small end. It is placed on a reinforced crankpin of 18 mm against the original 16 and a well increased cage with anti-friction wedges. Clearly, this crankshaft will withstand most very equipped engines. Being able to go up to 20,000 revolutions it will hold without worries on an MHR TEAM 80cc with internal rotor ignition for example.
Characteristics:
-Masses: full
-Soies (bearing seats): in diameter Ø20mm (large bearing, 6204)
-Reinforced connecting rod original size 85mm mounted on Ø18mm crank pin
-Original stroke 39.00mm
- Keying: yes
-Delivered with its needle cage
Mounts on 50cc motorcycles with gearbox equipped with the minarelli am3, am4, am5, am6 euro 1, am6 euro 2 engine:
APRILIA RS 50cc am6 engine from 1997 to 2006 (new attention after 2006 in derbi euro 3 engine)
APRILIA RX am6 engine (attention news after 2006 in derbi euro 3 engine)
APRILIA MX am6 engine (attention news after 2006 in derbi euro 3 engine)
APRILIA TUONO 50cc am6 engine from 1997 to 2006 (new attention after 2006 in derbi euro 3 engine)
BETA RR
BETA RR ALU
BETA CRE
HONDA HM
HONDA CRE
HONDA BAJA
HUSQUVARNA WXE
HUSQUVARNA CH
HM DERAPAGE
HM CRE
MALAGUTI DRAKON
MALAGUTI XTM
MALAGUTI XSM
FANTIC CABALLERO
PEUGEOT XP6
PEUGEOT XPS
MOTORHISPANIA RYZ
PEUGEOT XPS
PEUGEOT XP STREET
PEUGEOT XP STREET EVO
PEUGEOT XR6
MOTORHISPANIA RX
PEUGEOT XR7
MOTORHISPANIA RX-R
RIEJU RS1
RIEJU RS2
RIEJU RS2 MATRIX
RIEJU RS2 MATRIX PRO
RIEJU SMX
RIEJU MRX
RIEJU SPIKE
KEEWAY TX FR
YAMAHA DT
MBK X-LIMIT
YAMAHA TZR
MBK X-POWER
SHERCO SM
SHERCO ENDURO
SHERCO HRD
SHERCO ENDURO
CPI SM
And many other machines!
Reference: 31134950
A good reinforced crankshaft that mounts to virtually any configuration for an unbeatable price.
Reference: 210.0052
The new version of the crankshaft POLINI EVO for minarelli am6!
Reference: IM07062
An original crankshaft with bearings and spy perfectly adapted to be assembled together, reinforced model which will easily support an original type configuration up to the small 70cc kit.
Reference: IM07017
Original type crankshaft and superior quality. Reinforced, solid and resistant model.
Reference: 075414
A very high quality crankshaft, in large bristles, full masses delivered with its bearings for am6 engine!
Reference: CIG-29
A reinforced version in solid masses for minarelli am6 with normal size bearings!
Reference: 419
A very good quality mid-range crankshaft designed to go up to 14,000 rpm!
Reference: 9921720
A vilo of quality to guarantee a solid and powerful engine!
Reference: S410130320001
A good crankshaft reinforced and in full masses for your minarelli am6 with bearings of origin size.
Reference: CIG-133R
A reinforced crankshaft for a low solid engine, ideal to accompany a prepared configuration! Stroke slightly increased to 40.7mm!
Reference: 53401.14
From the top of the range race origin 39.00mm for mécaboite engine Minarelli AM6!
Reference: CB.44.8
A horse race between normal and long, wedge assembly without machining or on your small gain am6 and engine capacity (+ 1mm travel).
Reference: 518745
The ultra-reinforced full-mass CHR crankshaft. Forged / ground connecting rod with heat treatment!
Reference: CIG-130R
A reinforced crankshaft for a solid low engine, ideal to accompany a prepared configuration!
Reference: CIG-42
A reinforced version, full masses for minarelli am6 with bearings Ø20mm big litter.
Reference: 264006
The DOPPLER ER1 is the best value for money on the market, this model is reinforced and well balanced.