Banner
Rod casting competition reinforced upscale Made in Italy! Length model with 100mm crank pin Ø22mm for axis Ø16mm piston.
Following numerous requests we have the only spare rods for 2T engine crankshaft on 125cc motorcycles 2 TIME HONDA NS-F (attention to the NSR, this is not the same link !!!)
This model is well cast reinforced with a 100mm crank length, its lubrication are improved, the cage rod feet is treated Ø16X20X18mm money (thus piston pin to Ø16mm). The crank makes it a Ø22mm by length 55mm, connecting rod cage Ø22X28X16mm fact, the head width is 16mm, treated money. Photo may yet!
Reference: BC.5204
High-end reinforced casting competition rod Made in SPAIN! 105mm length model with Ø22mm crank pin for Ø16mm piston pin for DERBI 125cc GPR 2T.
Reference: BC2752RR
Bielle competition reinforced casting high-end Made in Italy! Model length 115mm with Ø26mm crankpin for Ø15mm axle Requires a shim under the cylinder on some engines.
Reference: BC.2752S
High-end reinforced casting competition rod Made in Italy! 110mm long model with Ø20mm crank pin for Ø15mm piston pin For KARTING and ROTAX 127 engine of 125cc 2T motorcycle.
Reference: BC.1731.1S
Rod casting competition reinforced upscale Made in Italy! Length model with 100mm crank pin Ø22mm for axis Ø16mm piston.
Reference: BC.2251.PX
High-end reinforced cast competition connecting rod Made in Italy! Model length 110mm with Ø22mm crank pin for Ø16mm piston pin.
Reference: BC.1211S
High-end reinforced casting competition rod Made in Italy! 110mm long model with Ø22mm crank pin for Ø16mm piston pin.
Reference: BUC.2055
Spare pin for 75cc 125cc engine.
Reference: AP0295375
The crankshaft for APRILIA 125cc 2T motorcycles SX, RX, and RS motor ROTAX 122.
Reference: BC.2250.PX
High-end reinforced cast competition connecting rod Made in Italy! Model length 105mm with Ø22mm crank pin for Ø16mm piston pin.
Reference: BC.2255.PX
High-end reinforced cast competition connecting rod Made in Italy! Model length 110mm with Ø22mm crank pin for Ø16mm piston pin.
Reference: 6001062
High-end reinforced casting link! Model length 110mm with crank pin Ø20mm for piston pin Ø15mm For motor KARTING and ROTAX 127 motorcycle 125cc 2T.
Reference: AP0944586
Ideal wedge for setting your crankshaft.
Reference: AP0944583
Ideal shim for the timing of your crankshaft.
Reference: 31902
The needle cage provided for your 125cc ROTAX or PIAGGIO VESPA PX.
Reference: AP0293846
Genuine original crankshaft ROTAX 123, 127 and 125 to 125cc Aprilia.
Reference: 6001156
Bielle competition casting reinforced! Model length 110mm with Ø22mm crank pin for Ø16mm piston pin for 2T CAGIVA engines.
Rod casting competition reinforced upscale Made in Italy! Length model with 100mm crank pin Ø22mm for axis Ø16mm piston.
