Reference: 76018.14
Crankshaft reinforced PARMAKIT for motorcycle 125 2T YAMAHA DT, TZR, TDR ...
High-end crankshaft engine YAMAHA 125cc 2-stroke 1988 to 2004 kick start only.
Banner
Bielle competition reinforced casting high-end Made in Italy! Model length 110mm with Ø22mm crank pin for Ø15mm piston pin Standard size of ROTAX 122 and 123 engines.
Following the many requests we have on spare rods only for engine crankshaft ROTAX 122 and 123. (size 110mm as the 127 and KARTING, but 28mm crankpin instead of 26mm).
Here is the model BC.2751S, this model is well cast reinforced with a connecting rod length of 110mm, its lubrication is improved, the cage of small end is made of silver treated Ø15X19X20mm (so for Ø15mm piston pin ). The crank pin makes it a Ø22mm by length 49mm, the big end cage is Ø20X28X16mm, the width of the head is 16mm, treated silver.
Non contractual photo for the moment!
Mounts on :
ROTAX 122 engine
ROTAX 123 engine
APRILIA AF1 125cc
APRILIA AF1 125cc FUTURA
APRILIA AF1 125cc REPLICA
APRILIA AF1 125cc SINTESI
APRILIA EUROPA 125cc
APRILIA PEGASO 125cc
APRILIA RED ROSE 125cc
APRILIA RS 125cc
APRILIA RS 125cc EXTREMA
APRILIA RX 125R
APRILIA SPORT 125cc
APRILIA SX 125cc
APRILIA TUAREG RALLY 125cc
APRILIA TUAREG WIND 125cc
HM CRE 125cc
HM DERAPAGE 125cc
And many other motorcycle 125cc. Do not mount on ROTAX 127 !!!
Reference: 76018.14
High-end crankshaft engine YAMAHA 125cc 2-stroke 1988 to 2004 kick start only.
Reference: BUC.2055
Spare pin for 75cc 125cc engine.
Reference: BC.1732S
High-end reinforced casting competition rod Made in Italy! 104mm long model with Ø24mm crank pin for Ø16mm piston pin.
Reference: 31902
The needle cage provided for your 125cc ROTAX or PIAGGIO VESPA PX.
Reference: BC.2752S
High-end reinforced casting competition rod Made in Italy! 110mm long model with Ø20mm crank pin for Ø15mm piston pin For KARTING and ROTAX 127 engine of 125cc 2T motorcycle.
Reference: AP0944583
Ideal shim for the timing of your crankshaft.
Reference: BC.2251.PX
High-end reinforced cast competition connecting rod Made in Italy! Model length 110mm with Ø22mm crank pin for Ø16mm piston pin.
Reference: 6030096
High-end crankshaft for YAMAHA 125cc 2-stroke engine from 1988 to 2004.
Reference: AP0293846
Genuine original crankshaft ROTAX 123, 127 and 125 to 125cc Aprilia.
Reference: BC.1210.1S
Reinforced casting competition rod for YAMAHA 125cc 2T LC engines from 1988 on TZR, DT, DTX, DTRE, TDR, DERBI GPR, GILERA SC ...
Reference: BC.2250.PX
High-end reinforced cast competition connecting rod Made in Italy! Model length 105mm with Ø22mm crank pin for Ø16mm piston pin.
Reference: AP0295375
The crankshaft for APRILIA 125cc 2T motorcycles SX, RX, and RS motor ROTAX 122.
Reference: BC.5204
High-end reinforced casting competition rod Made in SPAIN! 105mm length model with Ø22mm crank pin for Ø16mm piston pin for DERBI 125cc GPR 2T.
Reference: 6001064
Complete connecting rod kit for YAMAHA 125cc 2T LC engines fitted to the DTLC, DT LC with YPVS exhaust valve, from 1984 to 1992.
Reference: 6001062
High-end reinforced casting link! Model length 110mm with crank pin Ø20mm for piston pin Ø15mm For motor KARTING and ROTAX 127 motorcycle 125cc 2T.
Reference: 6001069
Complete connecting rod kit for YAMAHA 125cc 2T LC engines from 1988 on TZR, DT, DTX, DTRE, TDR, DERBI GPR, GILERA SC ...