Banner
Bielle competition reinforced casting high-end Made in Italy! Model length 115mm with Ø26mm crankpin for Ø15mm axle Requires a shim under the cylinder on some engines.
Following the many requests we have on spare rods only for 125cc engine crankshaft ROTAX motorcycle (on APRILIA machines), we offer the ITALKIT models.
Here is the model BC.2752RR, this model is well forged, it is a machined rod reinforced mass with a rod length of 115mm, its lubrication is improved, the cage of small end is made of silver treated Ø15X19X20mm (therefore for Ø15mm piston pin). The crank pin makes it a Ø20mm by length 49mm, the big end cage is Ø20X26X15mm so increased for a better holding, the width of the head is 14,9mm, treated silver.
Photo may yet!
Attention, long rod 115mm, requires a wedge of 5mm on ROTAX 122 and 123 or 127 or KARTING! According to models! Do not forget that it is a crankpin in 20mm.
Reference: BC.2752R
High-end reinforced casting competition rod Made in Italy! 110mm long model with Ø20mm crank pin for Ø15mm piston pin. ROTAX 127, 123, 122, KARTING ...
Reference: BC.1731.1S
Rod casting competition reinforced upscale Made in Italy! Length model with 100mm crank pin Ø22mm for axis Ø16mm piston.
Reference: BC.1210.1S
Reinforced casting competition rod for YAMAHA 125cc 2T LC engines from 1988 on TZR, DT, DTX, DTRE, TDR, DERBI GPR, GILERA SC ...
Reference: BC.1211S
High-end reinforced casting competition rod Made in Italy! 110mm long model with Ø22mm crank pin for Ø16mm piston pin.
Reference: 6030096
High-end crankshaft for YAMAHA 125cc 2-stroke engine from 1988 to 2004.
Reference: BC.5204
High-end reinforced casting competition rod Made in SPAIN! 105mm length model with Ø22mm crank pin for Ø16mm piston pin for DERBI 125cc GPR 2T.
Reference: BC.1731S
Rod casting competition reinforced upscale Made in Italy! Length model with 100mm crank pin Ø22mm for axis Ø16mm piston.
Reference: 6001062
High-end reinforced casting link! Model length 110mm with crank pin Ø20mm for piston pin Ø15mm For motor KARTING and ROTAX 127 motorcycle 125cc 2T.
Reference: 6001064
Complete connecting rod kit for YAMAHA 125cc 2T LC engines fitted to the DTLC, DT LC with YPVS exhaust valve, from 1984 to 1992.
Reference: 6001156
Bielle competition casting reinforced! Model length 110mm with Ø22mm crank pin for Ø16mm piston pin for 2T CAGIVA engines.
Reference: AP0944583
Ideal shim for the timing of your crankshaft.
Reference: BC.1732S
High-end reinforced casting competition rod Made in Italy! 104mm long model with Ø24mm crank pin for Ø16mm piston pin.
Reference: BC.2255.PX
High-end reinforced cast competition connecting rod Made in Italy! Model length 110mm with Ø22mm crank pin for Ø16mm piston pin.
Reference: BC.0252
High-end reinforced connecting rod Made in Italy! 116mm length model with special Ø20/18mm crankpin for Ø16mm axle.
Reference: BC.2752S
High-end reinforced casting competition rod Made in Italy! 110mm long model with Ø20mm crank pin for Ø15mm piston pin For KARTING and ROTAX 127 engine of 125cc 2T motorcycle.
Reference: BC.2250.PX
High-end reinforced cast competition connecting rod Made in Italy! Model length 105mm with Ø22mm crank pin for Ø16mm piston pin.
Bielle competition reinforced casting high-end Made in Italy! Model length 115mm with Ø26mm crankpin for Ø15mm axle Requires a shim under the cylinder on some engines.
