Reference: CB.4024
Crankshaft HOT RODS for KTM 125cc SX 2T from 2001 to 2015
Reinforced crankshaft for HUSQVARNA and KTM 125 2T from 2001 to 2015.
Banner
High-end reinforced casting competition rod Made in Italy! 110mm long model with Ø20mm crank pin for Ø15mm piston pin For KARTING and ROTAX 127 engine of 125cc 2T motorcycle.
Following the many requests that we have on spare connecting rods only for the crankshaft of KARTING ROTAX MAX engine (can also be mounted on certain ROTAX 127 engine motorcycles such as the APRILIA 125cc FUTURA, RX ...), we offer the ITALKIT models.
Here it is the model BC.2752S which also exists in version R (machined), this model is therefore well cast reinforced with a length of rod of 110mm, its lubrications are improved, the cage of small rods is in treated Ø15X19X20mm silver (therefore for piston pin Ø15mm). The crank pin is Ø20mm by length 49mm, the big end cage is Ø20X26X15mm therefore increased for a better hold, the width of the head is 15mm, treated silver.
Mounts on KARTING 125cc 2T engine, ROTAX 127 engine from APRILIA CLASSIC, RX, TUAREG, ETX 125cc, RED ROSE, AF1, FUTURA 125cc 2T ... Attention, check the size of your connecting rod before purchase !!!!
Reference: CB.4024
Reinforced crankshaft for HUSQVARNA and KTM 125 2T from 2001 to 2015.
Reference: 6001064
Complete connecting rod kit for YAMAHA 125cc 2T LC engines fitted to the DTLC, DT LC with YPVS exhaust valve, from 1984 to 1992.
Reference: AP0293846
Genuine original crankshaft ROTAX 123, 127 and 125 to 125cc Aprilia.
Reference: AP0944583
Ideal shim for the timing of your crankshaft.
Reference: BC.1731S
Rod casting competition reinforced upscale Made in Italy! Length model with 100mm crank pin Ø22mm for axis Ø16mm piston.
Reference: 6001156
Bielle competition casting reinforced! Model length 110mm with Ø22mm crank pin for Ø16mm piston pin for 2T CAGIVA engines.
Reference: 6030096
High-end crankshaft for YAMAHA 125cc 2-stroke engine from 1988 to 2004.
Reference: 6001069
Complete connecting rod kit for YAMAHA 125cc 2T LC engines from 1988 on TZR, DT, DTX, DTRE, TDR, DERBI GPR, GILERA SC ...
Reference: AP0944586
Ideal wedge for setting your crankshaft.
Reference: BC.1211S
High-end reinforced casting competition rod Made in Italy! 110mm long model with Ø22mm crank pin for Ø16mm piston pin.
Reference: 31902
The needle cage provided for your 125cc ROTAX or PIAGGIO VESPA PX.
Reference: BC2752RR
Bielle competition reinforced casting high-end Made in Italy! Model length 115mm with Ø26mm crankpin for Ø15mm axle Requires a shim under the cylinder on some engines.
Reference: BC.2251.PX
High-end reinforced cast competition connecting rod Made in Italy! Model length 110mm with Ø22mm crank pin for Ø16mm piston pin.
Reference: BC.2255.PX
High-end reinforced cast competition connecting rod Made in Italy! Model length 110mm with Ø22mm crank pin for Ø16mm piston pin.
Reference: BC.1210.1S
Reinforced casting competition rod for YAMAHA 125cc 2T LC engines from 1988 on TZR, DT, DTX, DTRE, TDR, DERBI GPR, GILERA SC ...
Reference: BC.0252
High-end reinforced connecting rod Made in Italy! 116mm length model with special Ø20/18mm crankpin for Ø16mm axle.