Reference: 478942
Set of 2 reinforced bearings (C4 polyamide cage) + DOPPLER crankshaft spy viton seals for derbi euro engine 1, 2, 3 & 4
Strong and very good quality bearing at an affordable price.
Banner
Here is one of the best quality / price ratio on the market and especially among the top-of-the-range models on the market! The DOPPLER ENDURANCE crankshaft is a reinforced model, balanced and in full masses, it is really intended for the reinforcement of the low engine and the performance, it is certainly the most studied crankshaft on the market. What are the differences with the ER1? The connecting rod, the materials used, the tolerance to high speeds….
More clearly the reinforcement and the balancing which are even more neat! The steels used are of the highest quality, they are treated and well hardened, the balancing is dynamic and really neat! When we talk about finishing at DOPPLER, we don't skimp! The finish is really perfect for such a price. The connecting rod is a very high-end lightweight model, it is placed on a reinforced crank pin and a well increased cage with anti-friction wedges. Blue anodized aluminum caps obviously cover the balancing holes.
^
For more pre-compression, the masses are extremely full. The lubrication is obviously reviewed and corrected too. The connecting rod is a well-designed model, casting mode of manufacture. Clearly, this crankshaft will withstand most very equipped engines it offers excellent performance and resistance to the height. DOPPLER did not forget to increase the needle cage of connecting rod small ends in Ø12X16X16Lmm against 12X15X15mm for the origin. This model is specific to mécaboites DERBI euro 3 and 4 engines.
Technicalities:
-Masses: full
-Soies in diameter: one in Ø20mm as the origin
-Bielle: reinforced original size 90mm
-Cage: increased 12X16X16mm
-Course: origin: 40.00mm
Reference: 478942
Strong and very good quality bearing at an affordable price.
Reference: 459124
A cage available in 2 sets of adjustment! Diameter Ø12 X 16 X 15mm for many applications.
Reference: IM07066
A reliable and solid crankshaft, reinforced model which will easily support an original type configuration up to the small 70cc kit.
Reference: 5312990
Top of the range ideal for a pushed engine configuration!
Reference: CIG-60
A very good quality crankshaft that will support 50cc & 70cc kits without problems.
Reference: 9930150
Excellent vilo delivered with its bearings and spy joints for EURO 3 and 4 engines.
Reference: 518746
High performance crankshaft, 18,000 rpm, forged connecting rod, ground with heat treatment.
Reference: 23170.14
An ultra reinforced crankshaft, high quality competition model ideal for a prepared engine configuration!
Reference: 467918
A very good crankshaft cheap to repair or strengthen your lower motor home.
Reference: 19883
A reinforced crankshaft at a low price but very well balanced. Ideal for small 70cc or 50cc kit.
Reference: 31085950
An ideal quality crankshaft to strengthen its low engine at a good price!
Reference: 12100057
BIDALOT Racing Replica reinforced crankshaft for DERBI Euro 3 and 4 engine.
Reference: CIG-129R
A high quality crankshaft, ideal for strengthening your low engine while preserving an original 40mm stroke!
Reference: CIG-132R
A high quality crankshaft, ideal for strengthening your low engine with a stroke very slightly increased by 40.7mm.
Reference: CIG-79R
A high quality crankshaft, ideal for strengthening your low engine while preserving an original 40mm stroke!
Reference: 468209
Ideal to accompany small 50cc & 70cc kits on your DERBI motorcycle.
Reference: 080015
Ideal for repairing your low engine and supporting an original configuration or small 50 & 70cc kits.
Reference: 12101386
High-end reinforced FACTORY crankshaft ideal to accompany a prepared engine configuration!