Banner
BIDALOT Racing Replica reinforced crankshaft for DERBI Euro 3 and 4 engine.
Here is the BIDALOT Racing Replica crankshaft for DERBI euro 3 and 4 engine (latest generation also mounted on 50cc APRILIA, DERBI, GILERA motorcycles). It is one of the best crankshafts on the market! It may well be much cheaper than MALOSSI MHR for example, it remains very efficient, studied and solid. It has an ultra studied and dynamic balancing (proven by its blue mallets).
The inertia is excellent. The masses are obviously full for more pre-compression, they are also case-hardened and specially treated (which gives this burnished color). It is directly taken from the real competition crankshaft BIDALOT Racing competition. The connecting rod is a reinforced model, it rests on an increased crank pin reinforced between 2 anti-friction shims, a small end cage also increased for less friction and well reinforced. The lubrication is reviewed, this vilo is designed for a Ø12X16X16mm cage or even Ø12X16X desired length!
It comes with its needle cage. The finish is really perfect ... Certainly the best quality / price ratio on the market, this crankshaft will offer you performance, strength, well attenuated vibrations ... The bristles are in original diameter therefore Ø20mm. This crankshaft will support without any difficulties all the most powerful kits like the BIDALOT RACING REPLICA 50 or 70cc, the MALOSSI MHR Team…. You will have to assemble it with the original balancer because this crankshaft is made for.
Technical characteristics :
-Course: 40.00mm (origin)
- Rod length: 90mm (original)
-For cage Ø12X16X16mm or Ø12X16X… According to your choice for the length.
-Soies diameter: Ø20mm as the origin
- Keying for ignition: yes
-Balancing: yes, dynamic
-Full masses: yes
-For engines: powerful and very powerful
- Needle cage delivered: yes
Reference: 81200303
High-end needle cage to be changed every 5,000 km, ideal for the biggest kits on the market.
Reference: 468210
One of the best quality / price ratios on the market for your 50 DERBI euro 3 and 4 motorcycle.
Reference: 150837
The most performance crankshaft from ARTEK which can go up to 18,000 revolutions!
Reference: CB.12.9R
The ULTIMATE vilo for DERBI EURO 3 and 4, large 20mm spans, forged mass machined rod, excellent balancing, .... The best of the best !!!
Reference: VI13
A very good quality crankshaft which will support pushing engine configurations without problems!
Reference: IM07066
A reliable and solid crankshaft, reinforced model which will easily support an original type configuration up to the small 70cc kit.
Reference: CIG-79R
A high quality crankshaft, ideal for strengthening your low engine while preserving an original 40mm stroke!
Reference: 468209
Ideal to accompany small 50cc & 70cc kits on your DERBI motorcycle.
Reference: 467918
A very good crankshaft cheap to repair or strengthen your lower motor home.
Reference: 080015
Ideal for repairing your low engine and supporting an original configuration or small 50 & 70cc kits.
Reference: 19883
A reinforced crankshaft at a low price but very well balanced. Ideal for small 70cc or 50cc kit.
Reference: 31085950
An ideal quality crankshaft to strengthen its low engine at a good price!
Reference: 518746
High performance crankshaft, 18,000 rpm, forged connecting rod, ground with heat treatment.
Reference: 5312990
Top of the range ideal for a pushed engine configuration!
Reference: 090949B
Ideal for a configuration even in 70cc, the vilo carenzi is well reinforced with a relatively low price!
Reference: CIG-60
A very good quality crankshaft that will support 50cc & 70cc kits without problems.
Reference: 486140
A crankshaft super reinforced in full masses, solid and of excellent quality with a low price! Ideal to accompany an original configuration or slightly prepared on mécaboite driving Derbi euro 3 and 4.
BIDALOT Racing Replica reinforced crankshaft for DERBI Euro 3 and 4 engine.
