Reference: 5312990
Crankshaft, connecting rod assembly MALOSSI MHR TEAM RHQ 40mm stroke for mécaboite driving DERBI euro 3 and 4
Top of the range ideal for a pushed engine configuration!
Banner
Here is one of the best value for money on the market offered by ARTEK. The ARTEK K1 crankshaft is a reinforced model, balanced and in full masses for DERBI EURO 3 and 4. It is really intended for the reinforcement of the low engine and the performance. The steels used are of the highest quality, they are treated and well hardened, the balancing is dynamic and really neat! For more pre-compression, the masses are full with a special coating. Forged H-shaped connecting rod which is placed on a reinforced crank pin and a well increased cage with anti-friction wedges. Grease points at the head and bottom of the connecting rod were used for increased reliability. Thanks to its architecture and its quality, this crankshaft can take a rotation speed of 14000 rpm! Neat dynamic balancing. Comes complete, as in our photo, with its reinforced needle cage. In short, this crankshaft will withstand most engines fitted, it offers excellent performance and strength to match. For engines intended for higher and more efficient speeds, we will still prefer to use the K2 model, which is certainly more expensive but designed to support larger engine configurations!
Characteristics:
-Masses: full
-Soies (bearing seats): in original diameter Ø20mm
-Reinforced connecting rod original size 90mm
-Original stroke 40.00mm
- Keying: yes
-Delivered with its needle cage
Reference: 5312990
Top of the range ideal for a pushed engine configuration!
Reference: 150837
The most performance crankshaft from ARTEK which can go up to 18,000 revolutions!
Reference: 468210
One of the best quality / price ratios on the market for your 50 DERBI euro 3 and 4 motorcycle.
Reference: 090705B
A good crankshaft at a low price which will hold very well on small 70cc for example.
Reference: 090936C
An ultra reinforced and perfectly balanced crankshaft for DERBI Euro 3 and 4. Ideal for large configurations.
Reference: 12100057
BIDALOT Racing Replica reinforced crankshaft for DERBI Euro 3 and 4 engine.
Reference: 31085950
An ideal quality crankshaft to strengthen its low engine at a good price!
Reference: 467918
A very good crankshaft cheap to repair or strengthen your lower motor home.
Reference: CIG-132R
A high quality crankshaft, ideal for strengthening your low engine with a stroke very slightly increased by 40.7mm.
Reference: CIG-129R
A high quality crankshaft, ideal for strengthening your low engine while preserving an original 40mm stroke!
Reference: 518746
High performance crankshaft, 18,000 rpm, forged connecting rod, ground with heat treatment.
Reference: 9930150
Excellent vilo delivered with its bearings and spy joints for EURO 3 and 4 engines.
Reference: 486140
A crankshaft super reinforced in full masses, solid and of excellent quality with a low price! Ideal to accompany an original configuration or slightly prepared on mécaboite driving Derbi euro 3 and 4.
Reference: 090949B
Ideal for a configuration even in 70cc, the vilo carenzi is well reinforced with a relatively low price!
Reference: CIG-60
A very good quality crankshaft that will support 50cc & 70cc kits without problems.
Reference: 23170.14
An ultra reinforced crankshaft, high quality competition model ideal for a prepared engine configuration!