Reference: 31087550
Crankshaft, connecting rod AIRSAL Xtrem long stroke 45.00mm for mécaboite driving DERBI euro 3 & 4
Linkage of quality and at a good price! 45mm long stroke model. In addition to this, you need to know more about it.
Banner
Normally reserved for the BIDALOT RACING FACTORY 80cc high engine, you can obviously use this crankshaft on other high engines. This crankshaft is really of very high quality, BIDALOT has selected the 44.90mm stroke as the most appropriate, the connecting rod and the silks (worn) are of original size, therefore 90mm and Ø20mm.
This vilo is obviously cut in the best steels (based on forged blanks) and has undergone several treatments. It is very well balanced (you need to preserve the original balancer / balance shaft with this linkage).
It is equipped with an ultra-reinforced connecting rod machined in the mass / polished finish with increased / studied lubrication holes. The big end cage is increased, that of the feet also with a size of Ø12X17X16mm against 12X15X15mm of origin for less friction and more solidity.
The connecting rod obviously rests on an increased crank pin with honeycombed anti-friction wedges. Really a real and beautiful exceptional piece reserved for the most passionate and connoisseur among you.
Summary :
Planned for high engine: BIDALOT RACING FACTORY 80cc Ø47.6mm for 44.90mm stroke
On engine: DERBI EURO 3
Bristle (bearing housing): Ø20mm
Cage: Ø12XØ17XL16mm (against 12X15X15mm for the origin)
Balancing: yes
Masses: full
Connecting rod length: 90mm
Stroke: 44.90mm (against 40mm for the origin)
Reinforced: yes foolproof
Spare and recommended parts :
Spare connecting rod
Spare needle cage size Ø12XØ17XL16mm
Reference: 31087550
Linkage of quality and at a good price! 45mm long stroke model. In addition to this, you need to know more about it.
Reference: CB.12.243.1
Special high-end 43mm long stroke connecting rod, 90mm machined forged connecting rod, ... With Ø12 mm silver treated needle cage Dynamic balancing designed to be assembled with a balancer.
Reference: CIG-132R
A high quality crankshaft, ideal for strengthening your low engine with a stroke very slightly increased by 40.7mm.
Reference: CIG-85R
Well reinforced with better balance and more strength than the normal BARIKIT model. This 43mm stroke is ideal for increasing your stroke, displacement, power, torque .... With a 1.5mm shim.
Reference: CB.12.245.2
Mazzuchelli top-of-the-range 44.90mm special long stroke crankshaft, forged connecting rod machined in the mass 90mm, ... with Ø12 mm silver treated needle cage Dynamic balancing designed to be assembled without balancer.
Reference: 9930210
Special high-end 44mm long stroke connecting rod, 90mm machined forged connecting rod, ... With Ø12 mm silver treated needle cage Dynamic balancing designed to be assembled with a balancer.
Reference: CB.12.245.1
Mazzuchelli top-of-the-range 44.90mm long stroke special crankshaft, forged connecting rod machined in the mass 90mm, ... with Ø12 mm silver treated needle cage Dynamic balancing designed to be assembled with a balancer.
Reference: 12100982
A high-end crank assembly, special 48.00mm long stroke to accompany a BIDALOT FACTORY 94cc high engine with machining of the engine casings!
Reference: CIG-141R
Well reinforced with better balance and more strength than the normal BARIKIT model. This 45mm stroke is ideal for increasing your stroke, displacement, power, torque ....
Reference: CB.12.95
Special crankshaft 42.00mm long stroke, 90mm forged connecting rod, ... with silver treated needle cage. Ideal for increasing its displacement and strengthening its low engine as it should.
Reference: CB.12.243.2
Special high-end 43mm long stroke connecting rod, 90mm machined forged connecting rod, ... with Ø12 mm silver treated needle cage Dynamic balancing designed to be assembled without balancer.
Reference: 23180.14
A crankshaft designed for the famous 110cc kit from PARMAKIT. But easily mounts on other engine. Be careful, however, not to have too high diagrams.