Reference: 9921180
Clutch (discs, spacers, springs) reinforced TPR Kevlar® for minarelli am6
A reinforced TPR clutch based on Kevlar cellulose for the engine of your minarelli am6.
Banner
Excellent quality, under the brand TOP PERFORMANCES. This complete kit of clutch includes all the accessories presented, in other words the drum, the reinforced springs 100 Kg, the reinforced discs with dividers and the pressure flange.The drum and the flange has an increased surface area, these parts are realized in aluminum alloy materials with specific heat treatment to optimize the cooling during friction and to avoid the risks of heating thus a better dissipation of the heat.
This is worth it to offer better performance compared to the original in its clutch function in the most extreme conditions. The increase of this specific clutch kit mainly allows to reduce the consumption and improve the efficiency of the engine revs, while eliminating the undesirable effects during the gear shifts, the actuation of the mechanism and its operation general.
A true concentrate of technology, competition parts that do not require any modifications when mounting on your Minarelli AM6 engine mécaboite because they are installed without any problems in place of the original parts.
As a reminder :
-The oil used must be the special 10W30 for gearbox with oil bath clutch, it takes between 0.75 and 0.85L.
-The gearbox emptying screw of the minarelli am6 engine is tightened to a torque of 1.8mdaN
-The transmission cover screws tighten to a torque of 1.1 mdaN
-The counter nut of the presser plate with a torque of 2.7 mdaN
-The 4 screws of the pressure plate (clutch springs) with a torque of 0.5 mdaN
-Clutch nut with washer that folds and the crankshaft nut that holds the 2 pinions to 7.5 mdaN torque
Reference: 9921180
A reinforced TPR clutch based on Kevlar cellulose for the engine of your minarelli am6.
Reference: 9920250
Ideal for refurbishing your clutch, quality and performance guaranteed.
Reference: 9920580
Ideal for strengthening your clutch! Competition springs for minarelli am6 engine.
Reference: 828
A clutch of very good quality which will allow you to have a more frank grip
Reference: 105894
Excellent gear oil for motorcycles with wet clutch.
Reference: EMB01
A reinforced clutch which will allow you a more frank grip and a slower wear. Ideal to accompany a 50cc push or 70cc kit.
Reference: VM.60.1
Quality springs for your minarelli am6 equipped engines.
Reference: S 1715/B
A clutch trimmed original type strengthened. Ideal for small configuration.
Reference: 32157
Ideal in case of breakage during the disassembly of your clutch for a change of vilo!
Reference: 2912235
Ideal for a harder clutch which therefore slips less.
Reference: 32158
Ideal in case of breakage or wear of your old element!
Reference: 458203
Good quality and original type, much cheaper than in concession.
Reference: 32400345
A good quality reinforced clutch for larger engine configurations.
Reference: S 1921/B
A reinforced clutch small price!
Reference: 510785
Clutch bell original CGN type ideal in case of breakage or wear of your old element!
Reference: 104066
100% 10W40 MOTUL 7100 engine oil special for road, off-road and adventure motorcycles.
Reference: 509447
Genuine original MINARELLI / YAMAHA clutch housing for am6 without kick start.
Reference: 99CFAMT10
Mass-machined and removable clutch housing for easy access to the clutch. Transparent window version.