Banner
An excellent 17.5mm PHVA carburetor with lever choke! Comes with its adjustment jets and cable elbow.
Here is the Ø17.5mm carburetor from TNT, model PHVA. This carb has a separate greasing and vacuum outlet. This PHVA carburetor will be able to be mounted on your 103 / MBK 51 mopeds, mécaboites and scooter, it is up to you to adapt it properly (pipe, sleeve, fittings, ...).
Its diameter for air filter is 37mm (external measurement). This carburetor is certainly not DELLORTO quality but it is very affordable! Its finish is smooth and clean. Some reproaches despite everything ... non-certified parts (jets, needle ...). Otherwise, we recommend it for those who use their 2 wheels every day.
It has a multitude of adjustments: richness screw, idle jet, needle valve,… An excellent compromise between performance / aesthetics / low price! It is also important to know that all DELLORTO parts are mounted on this carburetor. Delivered as presented, complete.
Delivered with jets in 55, 60, 65 (mounted on the carburetor), 70, 75, 80 and 85 + a straight cable inlet and a cubit!
In addition to this, you need to know more about it.
Summary :
Starter: lever
Possibility of vacuum valve: yes, delivered with shutter.
Separate lubrication: yes
Flexible mounting for sleeve or pipe Ø24mm anti-slip lip
Air filter fixing: unthreaded Ø37mm
Reference: 1210
A carburettor much better than a TNT which will make you consume little while filling your engine well.
Reference: 2613
The BS version of the 17mm PHBG. Version with special choke with large lateral lever, non-threaded, flexible air inlet and possibility of separate lubrication!
Reference: 2520
The real PHBG version in 17mm rigid diameter with lever choke and without separate greasing.
Reference: 473029
A good cheap carburetor much better than a TNT that will power your engine.
Reference: 2585
The AD version of the PHBG in diameter 17.5mm. Rigid, with cable choke without separate greasing.
Reference: 477383
A carburetor with a good quality racing look better than a TNT for a relatively low price.
Reference: 462489
A carburetor much better than a TNT which will be able to feed your engine all this at low prices.
Reference: 2684
The DD version of the 17mm PHBG carburetor. Flexible, cable choke, large diameter inlet tulip and possibility of separate lubrication!
Reference: 1012
Carburettor DELLORTO model PHVA ED 17.5, with outlet for depression and separate lubrication, flexible assembly, version without choke with a reduced price, for installation of electric choke!
Reference: 478707
Good quality carburettor, ideal for increasing the performance of your 2 wheels! BLACK EDITION type model.
Reference: 201.1701
An excellent high quality carburetor at a low price, with separate grease and vacuum sockets! Choice choke cable or lever!
Reference: 1389
Carburettor DELLORTO PHVA TS model 17.5, taking for depression and separated greasing, flexible mounting version with antifreeze taken without starter, small price guaranteed!
Reference: 201.1705
The most powerful version of the 17.5 POLINI CP carburetor! Delivered with a venturi tulip!
Reference: 468460
A carburetor much better than a TNT which will save you little fuel while filling your engine well.
Reference: 478708
A carburetor much better than a TNT racing look that will power your engine without spending too much money.
Reference: 3067
The 17.5mm version of the DELLORTO PHBN LS, with socket for vacuum, antifreeze and separate greasing, flexible mounting, cable choke! Ideal on Booster Spirit, MBK Nitro ...
An excellent 17.5mm PHVA carburetor with lever choke! Comes with its adjustment jets and cable elbow.
