Reference: 111010
TNT carburettor type PHVA 17.5 flexible, separate greasing, lever choke (delivered with adjustment jets and elbows)
An excellent 17.5mm PHVA carburetor with lever choke! Comes with its adjustment jets and cable elbow.
Banner
Here is the Ø17mm PHBG BS DELLORTO carburetor. It has a separate lubrication socket (you don't have to use it!), It has a special lever choke (easier to use than the normal lever model) and it is a flexible carburetor assembly. male for female intake pipe or flexible sleeve. This PHBG carburetor will be able to be mounted on your 103, MBK 51, mécaboites and scooters. Its diameter for the air filter is 32mm unthreaded, so you can install the air filters (or air box sleeve) in Ø 32mm!
This low-cost carburetor is of very high quality and has a multitude of adjustments: richness screw, idle jet, needle valve… It consumes relatively little when properly adjusted! It offers much more performance than SHA type carburetors ...
Unlike rigid type carburetors, these types of flexible models absorb very well the harmful vibrations for carburetion. Remember to check that your intake pipe accepts this carburetor, if not, think about buying intake pipe, sleeve ...
The carburetor is delivered as such:
Main jet small standard pitch: 70
Needle W16
40 ° cutting bushel
Needle well AN 258
Idle jet 45
Choke jet 65
Float in 4 grams
Straight cable tube
These accessories can be changed for better tuning, although these carburetors are very well preset. All spare parts and adjustments can be found here.
Air filter fixing Ø: Ø32mm not threaded
Pipe side fixing Ø: 25mm with anti-slip lip
Possibility of separate lubrication: yes
Large model lever choke
Socket for vacuum: no, this carburetor requires a valve without vacuum or a vacuum socket at the pipe
Reference: 111010
An excellent 17.5mm PHVA carburetor with lever choke! Comes with its adjustment jets and cable elbow.
Reference: 1210
A carburettor much better than a TNT which will make you consume little while filling your engine well.
Reference: 3067
The 17.5mm version of the DELLORTO PHBN LS, with socket for vacuum, antifreeze and separate greasing, flexible mounting, cable choke! Ideal on Booster Spirit, MBK Nitro ...
Reference: 201.1705
The most powerful version of the 17.5 POLINI CP carburetor! Delivered with a venturi tulip!
Reference: 492301
An excellent carburetor PHVA 17,5mm in a choke lever! Comes with adjustable nozzles and cable elbow.
Reference: 478708
A carburetor much better than a TNT racing look that will power your engine without spending too much money.
Reference: 477454
Good cheap carburetor better than TNT with a good finish and a racing look.
Reference: 15454
A good carburettor delivered with its automatic / electric choke
Reference: 473029
A good cheap carburetor much better than a TNT that will power your engine.
Reference: 2520
The real PHBG version in 17mm rigid diameter with lever choke and without separate greasing.
Reference: 477383
A carburetor with a good quality racing look better than a TNT for a relatively low price.
Reference: 478707
Good quality carburettor, ideal for increasing the performance of your 2 wheels! BLACK EDITION type model.
Reference: 1407
The 17.5mm version of the PHVA ED from DELLORTO, with vacuum outlet and separate lubrication, flexible mounting and choke lever!
Reference: 2684
The DD version of the 17mm PHBG carburetor. Flexible, cable choke, large diameter inlet tulip and possibility of separate lubrication!
Reference: 1389
Carburettor DELLORTO PHVA TS model 17.5, taking for depression and separated greasing, flexible mounting version with antifreeze taken without starter, small price guaranteed!
Reference: 477455
A very good little red carburettor in 17.5 flexible with choke lever!