Reference: 201.1703
POLINI CP 17.5 carburettor rigid, choke lever with separate lubrication
Ideal to accompany an original or prepared engine, CP POLINI 17.5mm version in rigid mounting.
Banner
Here is the Ø17mm PHBG DD DELLORTO carburetor. It has a separate greasing plug (you don't have to use it!), It has a cable choke and it is a flexible male carburetor assembly for female intake pipe or flexible sleeve. This PHBG carburetor will be able to be mounted on your 103, MBK 51, mécaboites and scooters.
It comes with an intake tulip to improve the venturi effect, so you can install the air filters (or air box sleeve) in Ø 32mm or Ø40mm! This low-cost carburetor is of very high quality and has a multitude of adjustments: richness screw, idle jet, needle valve ...
It consumes quite little when properly adjusted! It offers much more performance than SHA type carburetors ... Unlike rigid type carburetors, these types of flexible models absorb very well the vibrations harmful to carburizing. Remember to check that your intake pipe accepts this carburetor, if not, think about buying intake pipe, sleeve ...
The carburetor is delivered as such :
Main jet small standard pitch: 70
Needle W16
40 ° cutting bushel
Needle well AN 258
Idle jet 45
Choke jet 65
Float in 4 grams
90 ° cable tubes
These accessories can be changed for better tuning, although these carburetors are very well preset. All spare parts and adjustments can be found here.
Air filter fixing Ø: Ø32mm threaded without tulip, Ø40mm not threaded with tulip
Pipe side fixing Ø: 25mm with anti-slip lip
Possibility of separate lubrication: yes
Starter: cable
Socket for vacuum: no, this carburetor requires a valve without vacuum or a vacuum socket at the pipe
Reference: 201.1703
Ideal to accompany an original or prepared engine, CP POLINI 17.5mm version in rigid mounting.
Reference: 477383
A carburetor with a good quality racing look better than a TNT for a relatively low price.
Reference: 2585
The AD version of the PHBG in diameter 17.5mm. Rigid, with cable choke without separate greasing.
Reference: 1389
Carburettor DELLORTO PHVA TS model 17.5, taking for depression and separated greasing, flexible mounting version with antifreeze taken without starter, small price guaranteed!
Reference: 111010
An excellent 17.5mm PHVA carburetor with lever choke! Comes with its adjustment jets and cable elbow.
Reference: 2613
The BS version of the 17mm PHBG. Version with special choke with large lateral lever, non-threaded, flexible air inlet and possibility of separate lubrication!
Reference: 201.1701
An excellent high quality carburetor at a low price, with separate grease and vacuum sockets! Choice choke cable or lever!
Reference: 15454
A good carburettor delivered with its automatic / electric choke
Reference: 1231
The 17.5mm version of the DELLORTO PHBN BT, with socket for depression, antifreeze and separate lubrication, flexible mounting, cable choke! Ideal on scooter as on motorcycle 50!
Reference: 473029
A good cheap carburetor much better than a TNT that will power your engine.
Reference: 201.1702
An excellent high quality carburetor at a low price, with separate grease and vacuum sockets! Comes with adapter for filter Ø34 to 36mm.
Reference: 462489
A carburetor much better than a TNT which will be able to feed your engine all this at low prices.
Reference: 2520
The real PHBG version in 17mm rigid diameter with lever choke and without separate greasing.
Reference: 468460
A carburetor much better than a TNT which will save you little fuel while filling your engine well.
Reference: 478708
A carburetor much better than a TNT racing look that will power your engine without spending too much money.
Reference: 3067
The 17.5mm version of the DELLORTO PHBN LS, with socket for vacuum, antifreeze and separate greasing, flexible mounting, cable choke! Ideal on Booster Spirit, MBK Nitro ...