POLINI PWK 34 flexible carburettor, without separate greasing, lever choke

The biggest offered by the POLINI house. Here is the POLINI PWK 34mm carburetor of excellent quality, KEIHIN type version. Modified and checked at POLINI, this carburetor has a light aluminum alloy body, die-cast and a clean and smooth finish reviewed by the brand.



Its intake tulip is specifically machined, revised and corrected, in order to offer ever more performance.The bushel is flat, this very short carburetor therefore has a very good engine response, ideal especially on bar exhausts. In addition to this, you need to know more about it.



This carburetor is engraved POLINI on each side, it has a socket for the vacuum valves, you do not have to use it. The pre-settings (needle / well / nozzles…) are excellent and made for very powerful engines, very well prepared.



Clearly, this recovery of the carburetor from POLINI is a really high quality model for large configurations on mécaboite 50cc, 125cc 2-stroke motorcycle, scooter ... which competes on circuit, competition, run ... and which requires high-performance parts , reliable and solid!



Technical characteristics:

-34mm carburetor
-Diameter of the tulip (for air filter): Ø54mm.
-Diameter for flexible sleeve or pipe: Ø40mm.
-Socket for depression: no
-Main jet 122
-Secondary nozzle 42
-N68E needle
-Starter lever, pull tab. In addition to this, you need to know more about it.