Reference: 2513
Carburettor DELLORTO PHBG 19 AD choke lever, rigid, without separate greasing
The AD version of the PHBG DELLORTO, rigid, lever choke and without separate greasing.
Banner
If you want to preserve low consumption while having more performance than with a SHA or other model for endurance or the road for example, the PHBG model will be a very good compromise. This low-cost carburetor is of very high quality and has a multitude of adjustments: richness screw, idle jet, needle valve ... This model is the DS (also exists in BD, AD, DD, CS black edition model , or BS), this model is priced for base with the black edition model.
It is flexible mounting with a cable choke, you can also switch it to a lever choke without difficulty. Compared to the SHA carburetor, this model is much more precise, efficient in recovery, acceleration and peak speed. This model has a separate lubrication, you do not have to use it and it is originally delivered with a shutter on this socket. This model also comes with a black intake tulip! This tulip improves performance and is in Ø40mm, so you can put a fixing Ø40mm filter or remove this tulip to install a standard Ø PHBG Ø32mm filter.
Advice : accompany it with a rigid pipe with sleeve or direct flexible 19 or 21mm, carbon valve slats, pipe as much as possible aligned with the valves, you can simply use an original air filter but also a horn. Provide a range of jets from 76 to 95 depending on the filter used.
The carburetor is delivered as such :
Main jet small standard pitch: 75
Needle W09
Needle well AN 262
Idle jet 45
Choke jet 60
Float in 4 grams
These accessories can be changed for better tuning, although these carburetors are very well preset. All spare parts and adjustments can be found here.
Reference: 2513
The AD version of the PHBG DELLORTO, rigid, lever choke and without separate greasing.
Reference: 2695
The most racing version of the carburettor DELLORTO RACING BLACK EDITION, flexible, choke cable, possibility of separate greasing.
Reference: 2575
An excellent version of the real PHBG RIGIDE DELLORTO 19mm, this CS has a large intake tulip, a lever choke and a possibility of separate lubrication!
Reference: 2594
The most racing version after the black edition of the flexible 19mm PHBG! Aluminum tank with plug, inlet tulip ... Screw-on valve cover!
Reference: 2523
The real DELLORTO PHBG in 18mm!
Reference: 201.1904
CP POLINI 19mm version in rigid mounting Indispensable for a prepared engine configuration.
Reference: 201.1902
A very good high quality carburetor at low price, with separate lubrication and vacuum plugs! Choice of cable or lever choke!
Reference: 134071
Cheap and quality carburettor because it is between the TNT and the DELLORTO .
Reference: 2506
The AS 1 version of the real DELLORTO carburettor PHBG, rigid, choke lever without separate lubrication or depression.
Reference: 2522
The BS version on 19mm PHBG, flexible, lever choke! High quality certified!
Reference: 2568
The AS version of the DELLORTO PHBG Ø19,5mm. Excellent quality, with large diameter intake tulip, rigid, choke lever, without possibility of depression or separate greasing!
Reference: 2577
The CS version of the DELLORTO PHBG Ø19.5mm. Excellent quality, with large diameter, rigid intake tulip, choke lever, with possibility of depression or separate lubrication!
Reference: 2587
The AD version of the PHBG DELLORTO, rigid, choke lever and without separate lubrication or depression.
Reference: 2911
The ultimate and ultra racing version of the 19 PHBG, of much better quality with parameters revised upwards, Red Edition model!
Reference: 201.1901
A very good high quality carburetor at a low price, with separate greasing and vacuum plugs! Choice of cable or lever choke!
Reference: 517454
Replacement carburettor TUN'R 'R type PHBG DS for your motorcycle, scooter ...