Banner
The BS version on 19mm PHBG, flexible, lever choke! High quality certified!
Here is an ideal carburetor! It is of very good quality, not very expensive and well suited to small or large configurations, this PHBG BS model is a DELLORTO with lever choke (which you can switch to cable.
It does not have separate lubrication so you will have to mix it yourself! It is flexible mounting. You can mount it on the 103, 51, scooter, am6 and DERBI with original pipe ...
Its air filter attachment is in Ø31mm threaded, so you can put the cones and air box sleeve in Ø 30 to 32mm. You can also put an adaptation tulip to a larger diameter.
The carburetor now has a screw-on cover
Material type :
85 dellorto primary jet in small steps
Needle: type W07
Cutting bushel: 30 degrees
Choke jet size 60
Idle jet size 50
Needle well type AU in size 262
The choke has levers and the carburetor is male. (you can mount a cable starter ..)
float 4 grams
External diameter pipe side: 25mm
External diameter filter side: 31mm threaded air (possibility of adding a larger tulip)
Reference: 467791
Cheap and quality carburettor because it is located between TNT and DELLORTO.
Reference: 2568
The AS version of the DELLORTO PHBG Ø19,5mm. Excellent quality, with large diameter intake tulip, rigid, choke lever, without possibility of depression or separate greasing!
Reference: 2523
The real DELLORTO PHBG in 18mm!
Reference: 1179
The DD version on PHVB 19mm, flexible, cable starter! High quality certified!
Reference: 2506
The AS 1 version of the real DELLORTO carburettor PHBG, rigid, choke lever without separate lubrication or depression.
Reference: 201.1904
CP POLINI 19mm version in rigid mounting Indispensable for a prepared engine configuration.
Reference: 2587
The AD version of the PHBG DELLORTO, rigid, choke lever and without separate lubrication or depression.
Reference: 02631
The DS version of the 19mm DELLORTO VERITABLE PHBG. This flexible version has a cable choke, a separate lubrication possibility, without vacuum outlet.
Reference: 473460
A good quality carburetor for its price which will fuel your engine well but which will not have as good a finish as a DELLORTO.
Reference: 134071
Cheap and quality carburettor because it is between the TNT and the DELLORTO .
Reference: 2695
The most racing version of the carburettor DELLORTO RACING BLACK EDITION, flexible, choke cable, possibility of separate greasing.
Reference: 467793
A carburetor much better than a TNT but less well finished than a DELLORTO, but it will still provide a good filling of your engine for a relatively low price.
Reference: 2577
The CS version of the DELLORTO PHBG Ø19.5mm. Excellent quality, with large diameter, rigid intake tulip, choke lever, with possibility of depression or separate lubrication!
Reference: 466778
A carburetor that consumes little while fueling your engine well, and all at a low price!
Reference: 2911
The ultimate and ultra racing version of the 19 PHBG, of much better quality with parameters revised upwards, Red Edition model!
Reference: 2575
An excellent version of the real PHBG RIGIDE DELLORTO 19mm, this CS has a large intake tulip, a lever choke and a possibility of separate lubrication!
The BS version on 19mm PHBG, flexible, lever choke! High quality certified!
