Banner
The real DELLORTO PHBG in 18mm!
The Dellorto PHBG carburetor is one of the most used in the world in small displacement racing, however, size 18 remains relatively rare, this size nevertheless remains an interesting compromise when the 19 seems big and the 17 seems short… This version BS is a soft-mounted model with no separate lubrication (you can still mount the lubrication socket to the pipe). Its choke is a lever model and its cup / nozzle / needle well configuration is performance-based, this carburetor can very well be used for racing as well as for the road.
Carburetor diameter: Ø18mm
Pipe side fixing diameter: Ø24mm with anti-slip lip
Type: male (flexible)
Bushel: round needle
Pipe fixing diameter: 25mm
Air filter fixing diameter: threaded in d.32mm (possibility of placing a dellorto tulip)
Lever choke: (possibility of cable passage)
Separate lubrication: no (but possibility of applying it to the intake pipe)
Socket for vacuum: no, this carburetor requires a valve without vacuum or a vacuum socket at the pipe 
Needle: type W23
Needle well: AN266
Primary jet: small step 97 (banal dellorto)
Idle jet: 50
Choke jet: 60
Float: 4 grams
40 ° bushel cut
90 ° Elbow Throttle Cable Tube
Option parts for phbg carburetor :
Aluminum tank with racing cap
MALOSSI transparent tank
Full cable choke
Settings parts :
Float per grams
Idle jet
Main jet
Choke jet
Bushel per cut in °
Needle
Needle well
Spare parts :
Cover with screws
Bare tank
Screw set for tank
Complete gasket set
Idle screw with spring
PHBG lever choke
Complete air rich screw
90 ° elbow short
Float axis
Bushel spring
Bowl bottom cup
Needle
Reference: 201.1902
A very good high quality carburetor at low price, with separate lubrication and vacuum plugs! Choice of cable or lever choke!
Reference: 2577
The CS version of the DELLORTO PHBG Ø19.5mm. Excellent quality, with large diameter, rigid intake tulip, choke lever, with possibility of depression or separate lubrication!
Reference: 2695
The most racing version of the carburettor DELLORTO RACING BLACK EDITION, flexible, choke cable, possibility of separate greasing.
Reference: 517454
Replacement carburettor TUN'R 'R type PHBG DS for your motorcycle, scooter ...
Reference: 466778
A carburetor that consumes little while fueling your engine well, and all at a low price!
Reference: 2594
The most racing version after the black edition of the flexible 19mm PHBG! Aluminum tank with plug, inlet tulip ... Screw-on valve cover!
Reference: 467793
A carburetor much better than a TNT but less well finished than a DELLORTO, but it will still provide a good filling of your engine for a relatively low price.
Reference: 2522
The BS version on 19mm PHBG, flexible, lever choke! High quality certified!
Reference: 2575
An excellent version of the real PHBG RIGIDE DELLORTO 19mm, this CS has a large intake tulip, a lever choke and a possibility of separate lubrication!
Reference: 201.1904
CP POLINI 19mm version in rigid mounting Indispensable for a prepared engine configuration.
Reference: 201.1901
A very good high quality carburetor at a low price, with separate greasing and vacuum plugs! Choice of cable or lever choke!
Reference: 2506
The AS 1 version of the real DELLORTO carburettor PHBG, rigid, choke lever without separate lubrication or depression.
Reference: 2587
The AD version of the PHBG DELLORTO, rigid, choke lever and without separate lubrication or depression.
Reference: 473460
A good quality carburetor for its price which will fuel your engine well but which will not have as good a finish as a DELLORTO.
Reference: 2911
The ultimate and ultra racing version of the 19 PHBG, of much better quality with parameters revised upwards, Red Edition model!
Reference: 134071
Cheap and quality carburettor because it is between the TNT and the DELLORTO .
The real DELLORTO PHBG in 18mm!
