Reference: 01486_72
Main Jet For DELLORTO Carburetor Small Pitch 5mm Thread 8mm Length Genuine (INC Certified)
Certified DELLORTO INC! Choose real DELLORTO quality!
Banner
Here is the carburettor Ø17,5mm PHVA TS DELLORTO. This model is equipped with a plug for the separate greasing (you do not have to use it) and antifreeze circuit, without depression, it is a flexible mounting with a 24mm diameter fixing so a male carburetor for pipe d female inlet or flexible sleeve.
The peculiarity of this fuel is that it has no starter, it is up to you to put your equipment or equip you to accompany this PHVA with a choke cable, lever or automatic.
This carburetor PHVA will install without any problems on your 103, MBK 51, mécaboites and scooters, to you to adapt it. Its diameter for fixing the air filter is 35mm non threaded.
This low-cost carburetor is of very high quality and has a multitude of settings: wealth screw, idle jet, needle bushel ... It consumes very little provided that it is well adjusted! It offers much more performance than SHA type carburetors and ranks below PHBG and other more advanced versions.
Unlike rigid type carburetors, these flexible models absorb very well the harmful vibrations for carburation. Remember to check that your intake pipe accepts this carburetor, otherwise think well to buy intake pipe, sleeve ... for mounting and perfect operation.
Summary technical and material present in this PHBN 17,5 TS :
-Garter main small standard step Ø5mm DELLORTO 95
-Aiguille A2 + clips 3rd notch from the top
Needle 209GA
-40 ° Cutting bush
Idle speed nozzle 38
-Chitter starter 45
-Mounting type male, flexible Ø24mm
-For 2-stroke engine
-With separate greasing
-Diameter for air filter Ø35mm
-Support for depression: no
-Antifreeze circuit: yes
-Starter: not provided
Reference: 01486_72
Certified DELLORTO INC! Choose real DELLORTO quality!
Reference: 360.0003
Boxed jets, checked, certified for your DELLORTO SHA, PHBG carburettors and many others requiring Ø5mm.
Reference: 16250_1
Essential for tweaking your settings as much as possible and obtaining optimal operation of your engine. For DELLORTO PHBN and PHVA carburettors.
Reference: 14671_208
Spare essential in case of wear, loss or just to fine tune your carburettor DELLORTO PHBN, PHVA.
Reference: 11600_30
Indispensable for fine-tuning your settings or simply changing your idle jet.
Reference: 13815_40
Ideal for lost or wear or just to set as accurately as possible your carburettor PHVA, PHBN ...
Reference: 15349_00
Replacement valve spring only sold DELLORTO carburetor PHVA and PHBN.
Reference: 13678_00
Real piece of ideal replacement in case of breakage, wear ... certified DELLORTO.
Reference: 13681_00
Essential piece for any loss or breakages.
Reference: 13687_00
Ideal for any loss or breakage of your old media, plug socket on carburetor PHBN, PHVA.
Reference: 07526_00
Screw essential for maintaining your valve cover or choke carburettors DELLORTO PHBN, PHVA.
Reference: 53086_00
The complete idle screw for your PHBN, PHVA ... carburettors!
Reference: 53053_00
A complete kit at a low price, ideal for the maintenance of your carburetor PHBN, PHVA, PHVB ...
Reference: 13709_00
Indispensable for maintaining your tank on DELLORTO PHBN, PHVA carburetor.
Reference: 53029_00
Full idle screw for your DELLORTO PHVA carburetors.
Reference: 14130_00
The complete air wealth screws for your PHBN carburetors, PHVA, PHVB ...! Model with conical tip Ø1,6mm.
Reference: 14562_00
Full replacement cover for your carburettors DELLORTO PHVA, short straight outlet tube.
Reference: 1407
The 17.5mm version of the PHVA ED from DELLORTO, with vacuum outlet and separate lubrication, flexible mounting and choke lever!
Reference: 201.1702
An excellent high quality carburetor at a low price, with separate grease and vacuum sockets! Comes with adapter for filter Ø34 to 36mm.
Reference: 478708
A carburetor much better than a TNT racing look that will power your engine without spending too much money.
Reference: 2520
The real PHBG version in 17mm rigid diameter with lever choke and without separate greasing.
Reference: 478707
Good quality carburettor, ideal for increasing the performance of your 2 wheels! BLACK EDITION type model.
Reference: 466091
A good carburettor delivered with its automatic / electric choke
Reference: 1389
Carburettor DELLORTO PHVA TS model 17.5, taking for depression and separated greasing, flexible mounting version with antifreeze taken without starter, small price guaranteed!
Reference: 111010
An excellent 17.5mm PHVA carburetor with lever choke! Comes with its adjustment jets and cable elbow.
Reference: 2613
The BS version of the 17mm PHBG. Version with special choke with large lateral lever, non-threaded, flexible air inlet and possibility of separate lubrication!
Reference: 2585
The AD version of the PHBG in diameter 17.5mm. Rigid, with cable choke without separate greasing.
Reference: 477454
Good cheap carburetor better than TNT with a good finish and a racing look.
Reference: 201.1701
An excellent high quality carburetor at a low price, with separate grease and vacuum sockets! Choice choke cable or lever!
Reference: 1012
Carburettor DELLORTO model PHVA ED 17.5, with outlet for depression and separate lubrication, flexible assembly, version without choke with a reduced price, for installation of electric choke!
Reference: 15454
A good carburettor delivered with its automatic / electric choke
Reference: 201.1705
The most powerful version of the 17.5 POLINI CP carburetor! Delivered with a venturi tulip!
Reference: 477383
A carburetor with a good quality racing look better than a TNT for a relatively low price.