Banner
Essential piece to pull 2 cables with another directly from the throttle grip or other. Model with 36mm stroke and cable hole / sheath diameter 6.25mm Black color.
For a personal installation or simply replace your old worn part. Here is the cable splitter from DOMINO, Made in Italy. As its name indicates "splitter", this part makes it possible to send two cables entering directly to the element (for example the accelerator and the manual oil pump) then thanks to the internal system of connection, to connect a third cable exiting directly to your throttle grip or other. 
Its principle is simple and unique. True quality element, the internal stroke of the machined part is 36mm. Diameter of the 2 Ø6,25mm entrance holes. Comes complete as presented.
Features :
-Course 36mm
-Diameters of the holes entering and leaving the 3 passages of cable / sheath Ø6,25mm
-For cables diameter Ø3mm maximum
-For notch ball Ø3 X L.5mm maximum
-Total length of the piece 73mm
-Diameter of the piece Ø18mm
-Solid plastic / resistant black 
Reference: 1068.86
Essential piece to get 2 cables with another directly from the throttle grip or another. Model with 36mm stroke and cable hole / sleeve 6,80mm diameter. Color gray.
Reference: 1628.86
Essential piece to get 2 cables with another directly from the throttle grip or another. Model with 41mm stroke and cable hole / shaft diameter 6,80mm. Red color.
Reference: 2135.86
Essential piece to get 2 cables with another directly from the throttle grip or another. Model with 36mm stroke and cable hole / duct specific 6,80mm diameter with large opening on one side. Brown color.
Reference: 22 2428B
A high-end accelerator cable to slower wear.
Reference: 492198
Good quality and original type, ideal in case of breakage or wear of your old original cable.
Reference: 164402A
Accelerator cable original type ideal for a replacement much cheaper than in concession.
Reference: 2135.86
Essential piece to get 2 cables with another directly from the throttle grip or another. Model with 36mm stroke and cable hole / duct specific 6,80mm diameter with large opening on one side. Brown color.
Reference: 1068.86
Essential piece to get 2 cables with another directly from the throttle grip or another. Model with 36mm stroke and cable hole / sleeve 6,80mm diameter. Color gray.
Reference: 503874
Original DOPPLER cable ideal for replacement at low cost, RED sheath.
Reference: 503869
Good quality and original type, ideal in case of breakage or wear of your old original cable.
Reference: 514693
Good quality and original type, ideal in case of breakage or wear of your old original cable.
Reference: 0616
A high-end tool to lubricate your brake cables clutch / or other applications.
Reference: 458203
Good quality and original type, much cheaper than in concession.
Reference: 164770A
Cable with original type sheath, ideal for a replacement much cheaper than in concession.
Reference: 377020
Good quality and original type, much cheaper than in concession.
Reference: 490435
Original type clutch cable TEKNIX for mécaboite 50cc RIEJU MRT
Reference: 503860
Clutch cable original type DOPPLER for mécaboite RIEJU MRT, MRX, SMX, RRX, TANGO, RS3, NK3 ... with BLACK or RED sheath of your choice.
Reference: 508052
Good quality and original type, ideal in case of breakage or wear of your old original cable.
Reference: 164402
Original type accelerator cable ideal for cost-effective replacement.
Essential piece to pull 2 cables with another directly from the throttle grip or other. Model with 36mm stroke and cable hole / sheath diameter 6.25mm Black color.
