Reference: 100013
Set of 2 celeron competition bearings + CARENZI crankshaft spy joints for derbi euro engine 1, 2, 3 & 4
Set of 2 celeron bearings CARENZI by FAG with spy for DERBI engine.
Banner
Here is the set of 2 bearings + 2 crankshaft oil seals for mécaboite driving DERBI Euro 1, 2, 3 & 4, marketed by BARIKIT under the NTN brand, this set has been specifically selected to fit perfectly on a configuration prepared with crankshaft in Ø20mm diameter bristles.
This pack therefore consists of 2 C4 model bearings with riveted steel cage, Ø20mm X Ø47mm X 14mm thick and a set of 2 special Viton racing spy seals for high speed. Ideal for engines using high speeds, but are not recommended for low speed based engines as they will cause more vibration.
C4 Ø20mm bearings will allow better resistance of your low engine, additional reinforcement for high yields / speeds, a freed engine brake allowing smoother speeds, reduced vibrations ... and by consequences, felt performance!
Characteristics:
-X2 bearings C4 diameter Ø20mm X 47mm X thickness 14mm
-X2 spy joints 20X35X7mm
Reference: 100013
Set of 2 celeron bearings CARENZI by FAG with spy for DERBI engine.
Reference: SKF6204.C3
Crankshaft bearing 6204 C3 SKF for DERBI EURO 1, 2, 3 and 4 but also kid's displacement and quad ...
Reference: 100872
Ideal to reinforce your low engine of minarelli with quality material.
Reference: 9929200
Reinforced bearings that will support large configurations without any problem.
Reference: 285.0004
Top-of-the-range Viton oil seals offering minimum friction and perfect engine sealing.
Reference: 7961
C3 bearings that will support large configurations without any problems.
Reference: 489848
Ideal for strengthening your lower minarelli engine with quality material.
Reference: 80000400
Reinforced high-end bearing SKF by BIDALOT. Model 6204 size Ø20 X 47 X 14 mm.
Reference: 14103358
Ideal in case of breakage or loss for a really solid assembly of your PVL ignition or other.
Reference: 329064
Here is a quality product that will be suitable for small and medium configurations.
Reference: KCR-04
An ideal pack to strengthen your low engine on a slightly prepared configuration or original engine! C3 bearings and spy viton seals!
Reference: 6611566E
Reinforced bearings that will support large configurations without any problem.Available in C3 or C4 set!
Reference: 517159
Pinion, gear from CONTI allowing the assembly of a DERBI EURO 3 crankshaft on DERBI EURO 2.
Reference: 508298
Ideal for raising your diagrams or for fitting a 44mm long stroke crankshaft on DERBI euro 1 and 2 engine. Digitally machined aluminum wedge.
Reference: 040921B
Spy joints ideal for refurbishing your low engine, low price guaranteed!
Reference: 500064C
A complete box of keys that will allow you to make all your repairs, changes.