Reference: 500064C
Box of 80 keys / half-moon ACSUD
A complete box of keys that will allow you to make all your repairs, changes.
Banner
Here is the set of 2 bearings + 2 crankshaft oil seals for mécaboite driving DERBI Euro 1, 2, 3 & 4, marketed by BARIKIT under the NTN brand, this set has been specifically selected to fit perfectly on a configuration prepared with crankshaft in Ø20mm diameter bristles.
This pack therefore consists of 2 C4 model bearings with riveted steel cage, Ø20mm X Ø47mm X 14mm thick and a set of 2 special Viton racing spy seals for high speed. Ideal for engines using high speeds, but are not recommended for low speed based engines as they will cause more vibration.
C4 Ø20mm bearings will allow better resistance of your low engine, additional reinforcement for high yields / speeds, a freed engine brake allowing smoother speeds, reduced vibrations ... and by consequences, felt performance!
Characteristics:
-X2 bearings C4 diameter Ø20mm X 47mm X thickness 14mm
-X2 spy joints 20X35X7mm
Reference: 500064C
A complete box of keys that will allow you to make all your repairs, changes.
Reference: JAC-02
Ideal for a raiser of your charts or fitting a crankshaft long race 43mm on engine DERBI euro 1 and 2. Cale numerically machined aluminum.
Reference: 489848
Ideal for strengthening your lower minarelli engine with quality material.
Reference: 285.0004
Top-of-the-range Viton oil seals offering minimum friction and perfect engine sealing.
Reference: 12132870
BIDALOT Racing Factory spare connecting rod for low competition engine DERBI euro 1.2, 3 and 4.
Reference: 329064
Here is a quality product that will be suitable for small and medium configurations.
Reference: 508297
Ideal for raising your diagrams or for fitting a 43mm long stroke crankshaft on DERBI euro 1 and 2 engine. Digitally machined aluminum wedge.
Reference: KK01008
Good quality bearing and oil seal at an affordable price.
Reference: 451469
A complete high-end engine repair kit, ARTEIN seals, NTN bearings ... For DERBI euro 1 and 2 engines.
Reference: 282.0004
Reinforced bearings and spy seal studied for competition!
Reference: 9929200
Reinforced bearings that will support large configurations without any problem.
Reference: 508295
Ideal for raising your diagrams or for installing a long stroke crankshaft on DERBI euro 1 and 2 engine. Digitally machined aluminum wedge.
Reference: JAC-04
Ideal for a chart riser or fitting a crankshaft long race 43mm DERBI euro 1 and 2, here's hold BARIKIT aluminum base!
Reference: 478942
Strong and very good quality bearing at an affordable price.
Reference: 508296
Ideal for raising your diagrams or for fitting a 42mm long stroke crankshaft on DERBI euro 1 and 2 engine. Digitally machined aluminum wedge.
Reference: 100872
Ideal to reinforce your low engine of minarelli with quality material.