Reference: RST.325
Crankshaft needle cage Ø13X16X14mm ITALKIT reinforced for MBK 51 / MOTOBECANE AV10 / AV7
Reinforced model and of very high quality, ideal to avoid any breakage or seizing of your crankshaft.
Banner
Set of two original size TPI bearings, brand with good quality / price ratio, reinforced polyamide cage in 6302. Bearing clearance: C3. Suitable for original or very prepared configurations (not exceeding 13,500 / 14,000 rpm which will require C4). Comes with a set of good quality lip seal! Mounts on MOTOBECANE AV10 / AV7 / MBK 51 all models. Proposed by the French CGN.
Reference: RST.325
Reinforced model and of very high quality, ideal to avoid any breakage or seizing of your crankshaft.
Reference: 7964
High-end bearing with steel cage. Can support any configuration without problem.
Reference: 285.0110
High-end spinnaker seals for MBK 51.
Reference: 324244
Here is the only competition needle cage to be offered with specific sizes for your crankshaft.
Reference: 280.0030
Anti-vibration reinforced competition bearing.
Reference: 481763
Ideal in case of loss or replacement of a worn nut! Can also be mounted on crankshafts not to the right of MBK 51, ignition side.
Reference: 489602
Spare part essential in case of loss, wear ... of your old nut!
Reference: 141550
Set of two bearings + oil seals for low engine MBK 51 / AV10 / AV7
Reference: 4121
A reinforced needle cage with improved lubrication which will therefore be able to support very large kits without spending a lot of time.
Reference: 496273
Very good quality bearing with polyamide cage. Can handle most configuartions without problems.
Reference: 5068
A handy tool to remove most of your crankshaft bearings facilements or another.
Reference: 4497
Reinforced needle cage with improved lubrication.
Reference: 516947
For a much more resistant and waterproof, more reliable and easier refurbishment.
Reference: 167982
Reinforced needle cage with improved lubrication.
Reference: rrd_cage_51
High performance RRD needle cage for your moped.