Reference: 343.0028
Adapter, air filter tulip POLINI CP Ø46 to 61mm steel
Ideal to fit your Ø61mm air filter on your POLINI CP carburettor.
Banner
The best solution is to prepare his mécaboite sometimes to prepare its original air box. Indeed, it will be much quieter than a horn and takes less water, dust and other foreign bodies .... And above all you will have a large reserve of air. Thanks to this foam you can catch more air so more performance. This foam mounts in the original air box motorcycle Derbi Super Motard, Senda, Cross, Enduro, X-trem, X-race, DRD ... and other gear.
Think well to review your carburetor settings after installation of this type of filter. To prepare an air box, the most appropriate solution is to install a racing foam, and reopen the air inlet (generally recommend an entry 5X10CM instead of 3 small original holes you can add a grid with 4 screws to prevent anything from falling in the box).
You will find here oils and sprays for cleaning the air filter.
Reference: 343.0028
Ideal to fit your Ø61mm air filter on your POLINI CP carburettor.
Reference: 518555
STAGE 6 air filter, cotton horn for DELL'ORTO 26/28 carburettors, MIKUNI TM24 OR TYPE PWK (stage 6) Ø44 to 49mm
Reference: 466739
A design air filter worked with very good performance.
Reference: 04 2111
MALOSSI E3 air filter small but gives excellent engine breathing.
Reference: S410000200009
A competition filter with expanded foam that allows a large volume of air and therefore better recovery and performance.
Reference: 0413528
A filter specially designed for competition while tuning to your 2 wheels.
Reference: 115085A
Air filter nice design carbon and red color without cover, for a nice design with good performance on your 2 wheels.
Reference: 05 3733B
Ideal to increase the venturi effect so your performance.
Reference: 10001-82
A tulip which increases the venturi effect and therefore the efficiency of your engine.
Reference: 04 2418.50
MALOSSI E5 air filter with black cover. Available for PHVA, PHBN, PHBL, MIKUNI, PHVB, PHF, PHBH ...
Reference: 203.0066
Ideal for positioning your filter at 90 °, a high-end filter for optimal protection of your engine against external impurities.
Reference: 115050A
K & N green horn type air filter, angled at 45 ° but adjustable at half the elbow! A very good filter that breathes well.
Reference: 343.0035
Ideal to fit your Ø61mm air filter on your POLINI CP carburettor.
Reference: 203.0048
A filter available in 3 diameters and 2 lengths for maximum application, it reflects the quality of its design and design!
Reference: 468867
DOPPLER Air Box white, blue, gray, black or red. For pure air while keeping a racing design.
Reference: 04 3296.K0
MALOSSI E5 air filter with black cover. Available for PHVA, PHBG, MIKUNI, PHBL, PHBH ...