Banner
The PARMAKIT replacement piston by VERTEX for Ø48mm kits on MINARELLI P6.
Here is the piston mono segment replacement for kit 78cc Ø48mm PARMAKIT on MINARELLI P6. It is a piston of very high quality, it is equipped with a steel segment of 2mm thick Ø48mm! Comes complete with its d.12mm axis and clips.
Sizes :
A: 47.92mm
B: 47.93mm
C: 47.94mm
D: 47.95mm
E: 47.96mm
F: 47.97mm
Choose your wear range from standard diameter A Ø47,92mm up to the letter F according to the wear of your cylinder.
Specific References
Reference: 64266.16
High-end segment to refurbish and increase your engine compression!
Reference: 3620 (2113)
The piston Ø39mm replacement for old mopeds engine MINARELLI P4, P6 ...
Reference: 42115.02
The replacement piston by VERTEX for kits 70cc Ø44mm PARMAKIT aluminum for KREIDLER FLORET HP 5.2.
Reference: PI.56.380.M
Original type piston for PUCH engine, available from 38 to 40.25mm in diameter!
Reference: 020502.A
The replacement piston kits ATHENA for Ø48mm on minarelli P4.
Reference: 85120.02A
Spare piston kit for 70 ° on ZUNDAPP cc liquid cooled!
Reference: 64156.02A
The PARMAKIT replacement piston kits for Ø48mm SACHS RS 503, 504 long race.
Reference: 85306.02
The PARMAKIT replacement piston by VERTEX for Ø45mm kits on ZUNDAPP SUPERTERM, CS50, KS50.
Reference: 204.0004/A
Ideal to maintain your kit POLINI on SACHS in race 44mm.
Reference: 64405.02
Replacement piston for 50cc kit on ZUNDAPP air cooling!
Reference: 062002435
Spare piston els 65cc AIRSAL Ø43,5mm kits SACHS.
Reference: 020302.A
The ATHENA replacement piston for Ø48mm kits for Sachs CORSA LUNGA 50 14mm axle.
Reference: 073602.A
Replacement piston for your ATHENA kit!
Reference: 204.0601/A
Ideal for maintaining your POLINI kit on minarelli P4 or P6 42mm stroke.
Reference: 3462 (1975)
The piston Ø39mm replacement for old mopeds engine MINARELLI P6
Reference: 26100.02A
Replacement piston for kits 50cc PAMAKIT Ø40mm on FLANDRIA.
Reference: 060306435
Spare piston for kits 65cc AIRSAL Ø43,5mm aluminum engine MORINI M1, M101, M1ES 50, M1K.
The PARMAKIT replacement piston by VERTEX for Ø48mm kits on MINARELLI P6.
