Banner
Good quality housings, ideal to start fresh without spending too much.
Here are TEKNIX crankcases for MOTOBECANE AV7 motor moped 88, AV44, 40 ... Admission on the cylinder, 2 transfers. Ideal to start again on a new engine, they are not very expensive, they are however delivered 100% complete with seal, bearings, spy seals, screws, studs….
The alloy is of very good quality! Side internal finish, we saw better ... Much better even! They will ask to be well finished and well cleaned before assembly!
The exterior finish, that of the joint faces…. Is perfect. As strange as it may sound, the bearings are pre-assembled.
We simply recommend that you upon receipt of:
1- heat the casings
2- remove the bearings and spy joints
3- make a good finish / deburring
4- complete cleaning with gasoline of the housings and bearings
5- heat the crankcase again and reassemble the spy, bearings (previously placed on the crankshaft) ...
Mounts on all machines with AV7 engine such as :
Moped Motobécane / Motoconfort series 40 / 40T / 40S / 40L / N40S / N40 / 40TS / 40TL / N40TS / N40TL / 40VS / 40VL / H40S / H40L / H40TS / H40TL / H40VS / H40VL / H40TLC / H40VLC
Moped Motobécane / Motoconfort AV41 / AU41
Moped Moto-bike / Motoconfort AV42 / AU42
Moped Motobécane / Motoconfort AV43 / AU43
Moped Motobécane / Motoconfort AV44 / AU44
Moped Motobécane / Motoconfort AV46 / AU 46
Moped Motobécane / Motoconfort AV48 / AU48
Moped Motobécane / Motoconfort AV49 / AU 49
Moped Motobécane / Motoconfort series 50 / 50S / 50VS / 50L / 50VL / G50S / G50LC / G50VS / G50VLC / H50S / H50LC / H50VS / H50VLC
Moped Motobécane / Motoconfort AV56 / AU56
Moped Motobécane / Motoconfort AV59 / AU59
Moped Motobécane / Motoconfort AV65 / AU65
Moped Motobécane / Motoconfort AV68 / AU68
Moped Motobécane / Motoconfort AV76 / AU76
Moped Motobécane / Motoconfort AV78 / AU78
Moped Motobécane / Motoconfort AV79 / AU79
Moped Motobécane / Motoconfort AV85 / AU85
Moped Motobécane / Motoconfort AV87 / AU87
Moped Motobécane / Motoconfort AV88 / AU88
Moped Motobécane / Motoconfort AV89 / AU89
Moped Motobécane / Motoconfort MobyX X7
Moped Motobécane / Motoconfort SPR (Special Road)
Moped Motobécane / Motoconfort SP50 (Special 50)
Reference: 206828
Good quality housings, ideal for starting over without spending too much New machined version with grease holes!
Reference: 502321
A kit of 7 screws of crankcase of good quality, ideal to start again during a disassembly of motor AV7.
Reference: 4131
A seal of very good quality at a low price. for maximum reliability.
Reference: usinage-CL-carter
Machining for passage of long stroke crankshafts on MBK 51, PEUGEOT 103, ...
Good quality housings, ideal to start fresh without spending too much.
