Banner
Special housings for Ø50mm PARMAKIT kit on MBK 51 / MOTOBECANE AV10.
These housings are of good quality, delivered with spy gaskets, studs, screws ...
You can install MALOSSI valves and an intake pipe for original housings of your choice!
However, remember that it is still very difficult to put a large carburetion on the original architecture housings. Modified POLINI remains preferable.
We can not say that it is the best studied part of the market because unlike real racing cases like POLINI, these cases take an original architecture ...
However, they are provided as a base to be mounted with the large Ø50mm kit without machining the passage of the cylinder skirts (skirt foot) or 82cc as you can find at the bottom of the page.
Mounts on:
MBK 51 / MOTOBECANE AV10.
Reference: 51320.00
Huge 82cc kit with its cylinder head for MOTOBECANE AV10 / MBK 51 engine! Get 90cc with our long stroke crankshaft !!!
Reference: 51310.00
Huge 82cc kit WITHOUT its cylinder head for MOTOBECANE AV10 / MBK 51 engine! Get 90cc with our long stroke crankshaft !!!
Reference: CMG4
Competition engine casings for HYBRID and COMPETITION engines on MBK 51, PEUGEOT 103...
Reference: CMG2B 51
Competition engine casings for MBK 51 with AV10 engine base from MBK
Reference: 170.0110
The famous "big casings" with "big admission 4 slats valves" from POLINI to make your MBK 51 monstrous! This pack is delivered without bearings or studs unlike the other more complete pack.
Reference: 57 4275
Carter MALOSSI MG2 and MG3 for Peugeot 103
Reference: 12510113
Competition casings BIDALOT G1 / G2 for maximum performance, limited production!
Reference: 170.0100
The famous "big casings" with "big admission 4-leaf valves" from POLINI to make your MBK 51 monstrous!
Reference: 188763
Very well finished cards, complete to allow a very good quality reassembly on your AV10.
Reference: 57 6697
Out of production. Please do not order. Here indication tritre Casings MALOSSI G2 MBK51 motor / av10
Reference: usinage-54mm-carter
Machining for passage of Ø50mm cylinders on MBK 51, PEUGEOT 103, ...
Reference: usinage-CL-carter
Machining for passage of long stroke crankshafts on MBK 51, PEUGEOT 103, ...
Reference: 12000213
A set of G1 / G2 ultra powerful pieces in limited production!
Reference: 9159
Very well finished cards, complete to allow a very good quality reassembly on your AV10.
Special housings for Ø50mm PARMAKIT kit on MBK 51 / MOTOBECANE AV10.
