- -10%
Reference: 214537
Complete fixing kit with ball joint, springs, rod, screws for DOPPLER ER1 pot on MBK 51 square arm
A complete kit to refurbish your DOPPLER ER1 muffler on MBK 51 square arm!
Banner
Here is the DOPPLER model ER1 muffler for MBK 51. This good quality exhaust has a nice look, high performance and a fair price. The body is a real rolled welded sheet 1.2mm varnished finish. The sheet is of good quality, the volumes, shapes, counters cones… Are well studied!
This pot works very well on an original cylinder and on small 50cc kits (DOPPLER ER1, BIDALOT G1 Replica, AIRSAL T6, fox engine ...), it will not offer good performance on very sharp engines (from a its sheet too thick) or on large displacement engines (due to its architecture and volume).
We would say that the diagrams adapted to this exhaust go from 178 to 185 ° maximum, with a power regime of 9000rpm maximum. This exhaust is really solid and very quiet with its absorption cartridge filled with ceramic wool. It comes with fixings and all accessories.
Look, it is really nice and racing, it is obviously delivered with an approval certificate, it is clamped at the entry of the ball joint, be careful, if you remove the entry washer it is no longer road approved.
To conclude, this exhaust has a very racing look like the GIANNELLI SPORT and NINJA G2 Replica for example, it is really not noisy and very solid, it will adapt with a small configuration type 50cc kit, carburation 15 to 17 , 5mm, variator… However it will not follow on the 70cc and large 50cc kits with large diagrams. Really a great pot to roll every day.
Reference: 214537
A complete kit to refurbish your DOPPLER ER1 muffler on MBK 51 square arm!
Reference: 195283
Ideal for reappearing your exhaust system DOPPLER, GIANNELLI or other on 103, 51 ...
Reference: 195250
A high-end silencer that mounts on DOPPLER ER1 pot or other models (GIANNELLI ...).
Reference: 450360
Ideal in the event of a leak or noise in your silencer and exhaust.
Reference: 4159
An exhaust type origin black finish.
Reference: 98560
Out of production.
Reference: S704360
Out of production !!! Racing exhaust high quality, limited quantity produced since the 1990s!
Reference: EC27
A very good exhaust ideal for engines with low diagrams!
Reference: 30927
A very good little exhaust, solid and efficient, we highly appreciate its volumes!
Reference: EC23
Sport exhaust for MBK 51 / MOTOBECANE with square arm.
Reference: 50145CR
New, a chrome version of the SIMONINI pot for MBK 51, AV10, motobecane, AV7, AV88, 40 ...
Reference: 4578
Out of production.
Reference: 505716
A very good DOPPLER STREETCUP exhaust, solid and efficient, we will greatly appreciate its volumes!
Reference: 10072-P
"Special" high performance exhaust, particularly tuned to original engines and small kits! Mounts on MBK 51, MOTOBECANE with AV7, AV10 engine... Mounts even in combination with starter pedals!
Reference: 10072G-C
High performance exhaust CHROME version, particularly tuned to 70cc kit couplings! Mounts on MBK 51, MOTOBECANE with AV7, AV10 motor ... Mounts even in combination with starter pedals!
Reference: 4532
More efficient than the original, very good quality and very quiet!
Reference: 15000510
Outside productuction.
Reference: 4210
A pot with the original type look which still allows a performance gain compared to the origin.
Reference: 3219057
A very good MALOSSI VT exhaust, solid and efficient, we will greatly appreciate its volumes!
Reference: 205560
Out of production !!!