Reference: 4121
Crankshaft needle cage Ø13mm TEKNIX reinforced for MBK 51 / MOTOBECANE AV10 / AV7
A reinforced needle cage with improved lubrication which will therefore be able to support very large kits without spending a lot of time.
Banner
Here is the reinforced and improved ITALKIT RST.325 needle cage for MOTOBECANE / MBK 51 AV10 or AV7 engine. With such a cage you will always be safe from the risk of breakage or seizing! Very high quality, we recommend changing every 5,000 to 10,000 km depending on the power and rpm of the engine. Piston pin size to install, diameter 13mm as the origin. It mounts on the original crankshafts, TEKNIX, BIDALOT, MALOSSI, PARMAKIT… Or other model. Size Ø13mm X Ø16mm X Length 14mm.
Reference: 4121
A reinforced needle cage with improved lubrication which will therefore be able to support very large kits without spending a lot of time.
Reference: 4143
Quality product at an excellent price.
Reference: 19 1910B
To have a variator that slides as well as possible.
Reference: 323821
Premium pack that can withstand any big setup.
Reference: 505184
Set of two bearings + oil seals for low engine MBK 51 / AV10 / AV7
Reference: 167982
Reinforced needle cage with improved lubrication.
Reference: 492708
Set of two bearings + oil seals for low engine MBK 51 / AV10 / AV7
Reference: 152296
Very good quality bearing with steel cage. Can handle most configuartions without problems.
Reference: 280.0030
Anti-vibration reinforced competition bearing.
Reference: 516947
For a much more resistant and waterproof, more reliable and easier refurbishment.
Reference: 285.0110
High-end spinnaker seals for MBK 51.
Reference: 8675
Reinforced needle cage with improved lubrication.
Reference: 489602
Spare part essential in case of loss, wear ... of your old nut!
Reference: 4763
Ideal in case of breakage or wear for a good quality and safe reassembly.
Reference: 506270
Ignition rotor nut 11x100mm not to the right for MBK 51 moped.