Reference: 4143
Joint spy (spi) of crankshaft TEKNIX type & size origin (15X21X4mm) for MBK 51 / motobecane av10 / av7
Quality product at an excellent price.
Banner
The TEKNIX needle cage is a reinforced model, size internal Ø 13mm by external Ø 16mm by length 14mm. It is made for MBK 51 / Motobecane av10 / av7 engine. Piston pin size to install, diameter 13mm as the origin. It mounts on the original crankshafts, TEKNIX, BIDALOT, MALOSSI, PARMAKIT… Or other model. Like the MALOSSI, the lubrication is improved, quite impressive such a quality for such a ridiculous price. Guaranteed and certified quality.
Reference: 4143
Quality product at an excellent price.
Reference: 489602
Spare part essential in case of loss, wear ... of your old nut!
Reference: 481763
Ideal in case of loss or replacement of a worn nut! Can also be mounted on crankshafts not to the right of MBK 51, ignition side.
Reference: 4763
Ideal in case of breakage or wear for a good quality and safe reassembly.
Reference: 19 1910B
To have a variator that slides as well as possible.
Reference: 285.0110
High-end spinnaker seals for MBK 51.
Reference: 492708
Set of two bearings + oil seals for low engine MBK 51 / AV10 / AV7
Reference: 152296
Very good quality bearing with steel cage. Can handle most configuartions without problems.
Reference: 480974
Excellent in case of wear of your old nut.
Reference: 502028
Hexagonal ignition nut ideal in case of breakage or wear for a good quality and safe reassembly.
Reference: 7964
High-end bearing with steel cage. Can support any configuration without problem.
Reference: 280.0030
Anti-vibration reinforced competition bearing.
Reference: 541050O
A very practical tool to remove the bearings more easily from your crankshaft or other.
Reference: 255699
Vario nut for DOPPLER ER2 & ER3 on 103 SP & MBK 51! (also MOTOBECANE AV10 / AV7 ignition). Threading M11 X 1mm
Reference: RST.325
Reinforced model and of very high quality, ideal to avoid any breakage or seizing of your crankshaft.
Reference: 506270
Ignition rotor nut 11x100mm not to the right for MBK 51 moped.