Reference: 485343
1 stud M7 X 112mm from CGN cylinder for Minarelli am6, Derbi, Peugeot 103, Fox and Honda wallaroo
A reinforced stud from CGN, ideal in case of breakage or wear of your old stud. Maximum tightening 16nm or 1.63mk / g.
Banner
Set of 4 bolts reinforced with standard M7 thread, length 112.5mm. For cases MALOSSI, POLINI, origin…. From Peugeot 103, Peugeot fox and HONDA wallaroo, minarelli am6, DERBI euro 1 & 2 ... Very high quality! The general tightening recommended on a kit with this type of stud is 18 to 20nm! Consider using a torque wrench. This type of stud can withstand more than 25nm in tightening, the casing threads will give way well before them ...
Reference: 485343
A reinforced stud from CGN, ideal in case of breakage or wear of your old stud. Maximum tightening 16nm or 1.63mk / g.
Reference: 8814 / 821000
Convenient washers for a game-free setup.
Reference: X4 12512042
Reinforced and elongated nuts to better tighten the cylinder head and more precisely. They can withstand much higher tightening torques!
Reference: 315.0022
Of excellent quality and black in color, delivered with its copper seal.
Reference: 311.0000
POLINI cylinder head connector universal 14x1.5.
Reference: 504674
Ideal for aligning your pot with your cylinder to avoid power losses.
Reference: 4755
Spare nut essential for mounting your high engine!
Reference: 87307000
Ideal in case of breakage, loss or worn thread of your old nut.
Reference: 509548
Good quality and black in color, delivered with its copper seal.
Reference: 07 1928B
Special 8mm shim for long stroke crankshafts / long connecting rods RRD or MALOSSI on PEUGEOT 103.
Reference: 517937
Very long and reinforced, these nuts allow you to tighten with more precision and support a higher tightening torque!
Reference: 707712
An original stud from PEUGEOT ideal in case of breakage or wear of your old stud. Maximum tightening 16nm or 1,63mk / g.
Reference: usinage_culasse_sur_mesure
Custom machining of a cylinder head.
Reference: 8803
Reinforced cable clamp Ø8mm X L.1,3cm for cable diameter Ø3,5mm.
Reference: 472434
Ideal for redoing a cylinder in the event of primer, heating or simply to remove micro-scratches that hold the oil.
Reference: 031152
Original PEUGEOT copper decompression gasket for your PEUGEOT 103 cylinder head!