Reference: 517159
Crankshaft adapter pinion EURO 3 to EURO 2 CONTI on mécaboite 50cc DERBI
Pinion, gear from CONTI allowing the assembly of a DERBI EURO 3 crankshaft on DERBI EURO 2.
Banner
There are 37 products.
Active filters
Reference: 517159
Pinion, gear from CONTI allowing the assembly of a DERBI EURO 3 crankshaft on DERBI EURO 2.
Reference: 7961
Ideal to reinforce your low engine of minarelli with quality material.
Reference: 6616065E
C4 reinforced bearings, high precision competition!
Reference: 508295
Ideal for raising your diagrams or for installing a long stroke crankshaft on DERBI euro 1 and 2 engine. Digitally machined aluminum wedge.
Reference: 508297
Ideal for raising your diagrams or for fitting a 43mm long stroke crankshaft on DERBI euro 1 and 2 engine. Digitally machined aluminum wedge.
Reference: 508298
Ideal for raising your diagrams or for fitting a 44mm long stroke crankshaft on DERBI euro 1 and 2 engine. Digitally machined aluminum wedge.
Reference: 508296
Ideal for raising your diagrams or for fitting a 42mm long stroke crankshaft on DERBI euro 1 and 2 engine. Digitally machined aluminum wedge.
Reference: SKF6204.C3
Crankshaft bearing 6204 C3 SKF for DERBI EURO 1, 2, 3 and 4 but also kid's displacement and quad ...
Reference: 9929200
Reinforced bearings that will support large configurations without any problem.
Reference: 285.0004
Top-of-the-range Viton oil seals offering minimum friction and perfect engine sealing.
Reference: 847276
Original washer for the crankshaft pinion nut on the clutch side.
Reference: 100013
Set of 2 celeron bearings CARENZI by FAG with spy for DERBI engine.
Reference: 100872
Ideal to reinforce your low engine of minarelli with quality material.
Reference: 489848
Ideal for strengthening your lower minarelli engine with quality material.
Reference: 040921B
Spy joints ideal for refurbishing your low engine, low price guaranteed!
Reference: 282.0004
Reinforced bearings and spy seal studied for competition!
Reference: 80000400
Reinforced high-end bearing SKF by BIDALOT. Model 6204 size Ø20 X 47 X 14 mm.
Reference: JAC-02
Ideal for a raiser of your charts or fitting a crankshaft long race 43mm on engine DERBI euro 1 and 2. Cale numerically machined aluminum.
Reference: KCR-04
An ideal pack to strengthen your low engine on a slightly prepared configuration or original engine! C3 bearings and spy viton seals!
Reference: KCR-09
An ideal pack to strengthen your low engine on a prepared configuration developing high speeds! Special high speed C4 bearings and Viton spy seals!
Reference: 484558
Spare element essential in case of loss, wear ... of your old nut!