• Banner

Flaps, slats, check valves ... MINARELLI P4 & P6
Flaps, slats, check valves ... MINARELLI P4 & P6

Flaps, slats, check valves ... MINARELLI P4 & P6

Here you will find all the valves to your MINARELLI P4 and P6 engines. There is also the slats, ideal to refurbish your old MINARELLI P4 and P6 Engine by increasing its performance! valves of the slats must resonate more or less late, soft blades and in low quality (steel clicking ...) leave very early passing the gas mixture in good quantity but bridera (will resonate frequency) too early! That is why we prefer to use a fiber lamella or more carbon to properly erase the harmful vibration by increasing the thickness, we can get in clamping frequency later and thus free up system! Generally it is recommended: -for an original configuration 0.25mm -for an average configuration 0.30mm 0.35mm -for a high speed configuration -and finally to a very high 0.40mm scheme configuration. Obviously, some parameters such as the advance ignition, exhaust, diagram, the diameter of the carburetion and diffuser system will vary these parameters!

Active filters